User Manual

Touch Panel Standard Line Commissioning 161
762-4xxx TP 600
Manual
Version 1.3.0
8.7.3.4.2 “Domain Name” Group
Table 135: WBM “Host/Domain Name” Page – “Domain Name” Group
Parameter
Explanation
Currently used
If you have selected dynamic assignment of an IP
address via DHCP, the name of the domain
currently being used is displayed.
Configured
Set the domain name here.
Click the [Submit] button to apply a change. To reset the input field, click the
[Clear] button. The change takes effect immediately.
If a domain name is supplied via a DHCP response, this is enabled in the system.
If there are several server network interfaces with DHCP, the last received
domain name is always valid.
If only the domain name configured here is to be valid, the configuration of the
DHCP server must be adapted so that no domain names are transferred in the
DHCP response.
8.7.3.5 “Routing” Page
On this page you can find settings and information on the routing between the
network interfaces.
8.7.3.5.1 “General Routing Configuration” Group
Table 136: WBM “Routing” Page – “General Routing Configuration” Group
Parameter
Explanation
Enabled
Specify here whether forwarding of IP data packets
is allowed between different network interfaces.
If the box is not checked, the settings under “Static
Routes” are used, without allowing IP data packets
that arrive at the product on one network interface to
leave the product on different network interface.
If the box is checked, IP packets can be forwarded
between the interfaces.
Other settings may be necessary on this WBM
page.
Click the [Submit] button to apply the change. The changes take effect
immediately.