User Manual

128 Commissioning Touch Panel Standard Line
762-4xxx TP 600
Manual
Version 1.3.0
8.6.1.26 “Configuration of PLC Runtime Services” Page
The settings for various services of the enabled runtime system are shown on the
“Configuration of PLC Runtime Services” page.
8.6.1.26.1 “General Configuration” Group
Table 96: WBM “Configuration of PLC Runtime Services” Page – “General Configuration” Group
Parameters
Explanation
Port Authentication
Password
Enter the new password for port authentication.
Confirm Password
Enter the new password again for confirmation.
Click [Submit] to apply change. The change is effective immediately.
8.6.1.26.2 “e!RUNTIME” Group
Table 97: WBM “Configuration of CODESYS Services” Page – “e!RUNTIME Webserver” Group
Parameters
Explanation
e!RUNTIME State
This displays the status of the e!RUNTIME system
(enabled/disabled).
Webserver enabled
Enable or disable the Webserver for the
e!RUNTIME web visualization.
Port authentication enabled
Enter here whether a login is required for connecting
to the device. The user name is “admin” and the
password is specified under “General
Configuration”.
Click [Submit] to apply change. The change is effective immediately.