User Manual

104 Commissioning Touch Panel Standard Line
762-4xxx TP 600
Manual
Version 1.3.0
8.6.1.10.2 “Firewall Parameters Interface xxx” Group
These settings in this group refer to the configuration of the firewall at IP level.
Table 67: WBM “General Firewall Configuration” Page – “Firewall Parameter Interface xxx” Group
Parameters
Explanation
Firewall enabled for
Interface
Enable or disable the firewall for the specific
interface.
ICMP echo protection
Enable or disable the “ICMP echo” protection for the
respective interface.
ICMP echo limit per second
You can specify the maximum number of “ICMP
echo bursts” per second.
“0” = “Disabled”
ICMP burst limit
You can specify the maximum number of “ICMP
echo bursts” per second.
“0” = “Disabled”
Service enabled
Telnet
Enable or disable the
firewall for the respective
service.
The services themselves
must be enabled or
disabled separately on the
“Ports and Services” page.
FTP
FTPS
HTTP
HTTPS
I/O-CHECK
PLC Runtime
PLC WebVisu –
direct link (port 8080)
SSH
TFTP
BootP/DHCP
DNS
Modbus TCP
Modbus UDP
SNMP
OPC UA
Click [Submit] to apply the change. The change is effective immediately.