User Manual

12 Regulations Touch Panel Standard Line
762-4xxx TP 600
Manual
Version 1.3.0
1 Regulations
The WAGO Touch Panel shall only be installed and operated according to the
instructions in this documentation.
Always retain this documentation!
This documentation is part of the product. Therefore, retain the documentation
during the entire service life of the product. Pass on the documentation to any
subsequent user. In addition, ensure that any supplement to this documentation
is included, if necessary.
1.1 Validity of this Documentation
This documentation is valid for the following WAGO Touch Panels:
Table 1: Variants
Item Number/Variant
Designation
762-4101
TP 600 4.3 480x272 PIO1 WP
762-4102
TP 600 5.7 640x480 PIO1 WP
762-4103
TP 600 7.0 800x480 PIO1 WP
762-4104
TP 600 10.1 1280x800 PIO1 WP
762-4201/8000-0001
TP 600 4.3 480x272 PIO2 VP
762-4202/8000-0001
TP 600 5.7 640x480 PIO2 VP
762-4203/8000-0001
TP 600 7.0 800x480 PIO2 VP
762-4204/8000-0001
TP 600 10.1 1280x800 PIO2 VP
762-4301/8000-0002
TP 600 4.3 480x272 PIO3 CP
762-4302/8000-0002
TP 600 5.7 640x480 PIO3 CP
762-4303/8000-0002
TP 600 7.0 800x480 PIO3 CP
762-4304/8000-0002
TP 600 10.1 1280x800 PIO3 CP
1.2 Document portfolio
Besides this manual, you should consult the following WAGO documents:
• WAGO I/O SYSTEM 750, manual for the PFC Controller used
• WAGO I/O SYSTEM 750, “Cybersecurity for PFC100/PFC200 Controllers”
manual
• WAGO Software, “e!COCKPIT” manual (2759-0101)
• “Industrial ETHERNET” technology manual
These documents are available for download from the WAGO Website
www.wago.com.