User Manual

Touch Panel Standard Line Visualization 189
762-4xxx TP 600
Manual
Version 1.3.0
9 Visualization
When operating the machine resp. system to be controlled, the application
e!RUNTIME „HMI visualization“ resp. „Target visualization“ is used to display the
programmed visualization.
Figure 31: Visualization Example
The Web visualization starts automatically after switching on the supply voltage if
defined as the start page. You can then view the displayed values or diagrams
and control the system using the buttons.
9.1 Touch Operation
The screen is touching sensitive. The buttons displayed are activated by touching
with a finger or stylus.
Alternatively, you can also use a USB mouse and click the buttons.
Take care when operating the touch screen!
Always touch the screen at one point, i.e., do not touch multiple touch elements
at the same time. Doing so can trigger unintended actions.
Do not use pointed or sharp objects to operate the touch screen to avoid
damaging the plastic surface of the touch screen.
Only attach or disconnect the panel when all subassemblies in the system are
disconnected from power supply.
Faulty or incorrect connections can lead to irreversible damage to the
subassembly.
Fingertip operation causes the least amount of wear.
Avoid using the fingernail for operation.
A special stylus rounded, burr-free plastic tip must be used as the touch stylus.
The radius must be min. 1 mm.