User Manual

76 Connecting Touch Panel Standard Line
762-4xxx TP 600
Manual
Version 1.3.0
Do not use USB devices connected to earth!
USB interface shielding is not earthed directly, rather via interference-
suppression capacitor. Only keyboards, mice and USB memory sticks may be
connected. Do not connect devices that are earthed, e.g., printers, because they
bridge the interference-suppression capacitors and thus interference immunity is
reduced.
Insert microSD memory cards as far into the slot until they click into place. The
slot can be sealed to protect the card.
To remove, press the card further down until the lock releases. The card can then
be removed.
If your application includes acoustic signals/warnings, you can plug the 3.5 mm
stereo plug of headphones or similar audio systems into the audio output
socket.
For more information about the interfaces, see section “Device Description” >
“Connectors” and “Technical Data”.
7.4 Connecting the Power Supply
Connect the power supply to connector X5, pin 1 (+) and 2 (−). To do this, you
must also use the included 734-103 Female Connector.