User Manual

Touch Panel Standard Line Functions 67
762-4xxx TP 600
Manual
Version 1.3.0
The following options are available from the “Backup” function in the Legacy
version of the WBM:
• Settings
• System
The network, or when inserted, the memory card or USB memory can be
selected as the target medium.
The files of the internal drive are stored on the target medium in the directory
media/sd/copy and in the corresponding subdirectories. Information that does not
exist as files in the controller is saved in XML format in the media/sd/settings
directory.
The device settings and files of the internal drive are then saved on the target
medium.
5.8.2 Restore
This function is used to load the data and device settings from the memory card
to the internal memory during operation.
The following options are available from the “Restore” function in the Legacy
version of the WBM:
• Settings
• System
The network, or when inserted, the memory card or USB memory can be
selected as the source medium.
When loading the data, the files are copied from the directory media/sd/copy of
the source medium to the appropriate directories on the internal memory.
The device restarts if parameters change!
Note that the device loading the data executes a restart if parameters in the
internal drive are overwritten with different parameter settings from the memory
card.
Data size may not be larger than the internal drive size!
Note that the size of data in the media/sd/copy directory may not exceed the total
size of the internal drive.