User Manual

Touch Panel Standard Line Commissioning 147
762-4xxx TP 600
Manual
Version 1.3.0
To transfer the selected file from the controller to the PC, click [Start Download]
button.
The changes only take effect after restarting the controller. For this purpose, use
the WBM reboot function. Do not shut down the controller too early!
8.6.1.37.3 “Certificate Upload” Group
Table 119: WBM “Configuration of OpenVPN and IPsec” Page – “Certificate Upload” Group
Parameters
Explanation
New Certificate
Select an certificate for transfer from a PC to the
controller.
New Private Key
Select a key for transfer from a PC to the controller.
To select a file on the PC, click the [Browse] button.
To transfer the selected file to the controller, click [Start Upload] button. The
changes will be effective immediately.
The certificates are saved in the directory “/etc/certificates/” and the keys in the
directory “/etc/certificates/keys/”.
8.6.1.37.4 “Certificate List” Group
Table 120: WBM “Configuration of OpenVPN and IPsec” Page – “Certificate List” Group
Parameters
Explanation
<certificate name>
The loaded certificates are displayed. If no
certificate has been loaded. “No certificates existing”
is displayed.
Click [Delete] to delete an entry. The changes will be effective immediately.
8.6.1.37.5 “Private Key List” Group
Table 121: WBM “Configuration of OpenVPN and IPsec” Page – “Private Key List” Group
Parameters
Explanation
<key name>
The loaded keys are displayed. If no keys has been
loaded. “No keys existing” is displayed.
Click [Delete] to delete an entry. The changes will be effective immediately.