User Manual

Touch Panel Standard Line Service 199
762-4xxx TP 600
Manual
Version 1.3.0
The newly installed firmware is now available on your controller.
11.4.2 Use WAGOupload to Update the Firmware
1. Launch WAGOupload.
2. Click the [Update Firmware] action.
3. In the “Select Target Controllers” dialog, enter the IP address of your
controller in the “Transfer via TCP/IP” option.
4. Click [Find Controller].
Your controller is now displayed in the list.
5. Select the displayed controller and click [Next].
6. In the “Select Update File” dialog, select the *.wup firmware file for the
required firmware.
7. Click [Next].
8. Click [Next] to confirm the summary.
9. Wait until the operation ends with a status message and only then click
[Exit] to close the window.
The newly installed firmware is now available on your controller.