User Manual

Touch Panel Standard Line Diagnostics 195
762-4xxx TP 600
Manual
Version 1.3.0
10 Diagnostics
For diagnostic analysis, evaluate the indicator of the status LED on the front and
read the error messages in the legacy version of the WBM under “Diagnostics”.
The possible indicators are explained as follows:
Table 181: LED Signaling
LED Display
Message
Green, steady
The panel is ready to operate.
Red, flashing
There is an error.
(The specific error message is displayed.)
Blue, flashing
There is a connection error to the controller.
No communication
In the case of a connection error, check if:
• The controller is in operation.
• The network settings are correct.
• The controller URL is correct.
If the errors cannot be resolved, please contact WAGO Support.
[e-mail]
Disclose the color that is output.
Logbook
System messages, e.g., “Start of the panel” or “Communication interruptions”, are
logged in the logbook.
The “Diagnostic” function in the legacy version of the WBM makes it possible to
read the logbook of the panel.