User Manual

172 Commissioning Touch Panel Advanced Line
762-5xxx/8000-000x TP 600
Manual
Version 1.3.0
8.6.4.1 “Security” Tab
8.6.4.1.1 “Configuration of OpenVPN and IPsec” Page
The general settings for OpenVPN and IPsec are shown on this page.
8.6.4.1.2 “OpenVPN” Group
Table 157: WBM “Configuration of OpenVPN and IPsec” Page – “OpenVPN” Group
Parameters
Explanation
Current State
The current status of the OpenVPN service is
displayed.
stopped
The service is disabled.
running
The service is enabled.
OpenVPN enabled
Enable or disable the OpenVPN service.
openvpn.config
Select an OpenVPN configuration file to be
transferred from PC to product or vice versa.
To apply a status change, click the [Submit] button.
To select a file on the product or PC, click the [Browse] button.
To transfer the selected file from the PC to the product, click [Start Upload]
button.
To transfer the selected file from the product to the PC, click [Start Download]
button.
The changes only take effect after restarting the product. For this purpose, use
the WBM reboot function. Do not shut down the product too early!
8.6.4.2 “IPsec” Group
Table 158: WBM “Configuration of OpenVPN and IPsec” Page – “IPsec” Group
Parameters
Explanation
Current State
The current status of the IPsec service is displayed.
stopped
The service is disabled.
running
The service is enabled.
IPsec enabled
Enable or disable the IPsec service.
ipsec.config
Select an IPsec configuration file to be transferred
from PC to product or vice versa.
To apply a status change, click the [Submit] button.
To select a file on the product or PC, click the [Browse] button.
To transfer the selected file to the product, click [Start Upload] button.
To transfer the selected file from the product to the PC, click [Start Download]
button.