User Manual

182 Visualization Touch Panel Advanced Line
762-5xxx/8000-000x TP 600
Manual
Version 1.3.0
9 Visualization
When operating the machine resp. system to be controlled, the application
e!RUNTIME „HMI visualization“ resp. „Target visualization“ is used to display the
programmed visualization.
Figure 27: Visualization Example
The Web visualization starts automatically after switching on the supply voltage if
defined as the start page. You can then view the displayed values or diagrams
and control the system using the buttons.
9.1 Touch Operation
The display is touch-sensitive. The buttons displayed are activated by touching
them with one or more fingers or with a stylus appropriate for capacitive displays.
The display detects and implements certain gestures, such as swiping to move to
the next page.
Alternatively, you can also use a USB mouse and click the buttons.
Take care when operating the touch screen!
Do not use pointed or sharp objects to operate the touch screen to avoid
damaging the glass surface of the touch screen.
Only attach or disconnect the panel when all subassemblies in the system are
disconnected from power supply.
Faulty or incorrect connections can lead to irreversible damage to the
subassembly.
9.2 Swipe Gestures
The display recognizes swipe gestures that run from the top down a bit. Put your
finger at the top of the transition of the black film to the display and drag down