User Manual

Touch Panel Advanced Line Functions 53
762-5xxx/8000-000x TP 600
Manual
Version 1.3.0
5 Functions
5.1 Visu Panel
The Visu Panel is a classic HMI device. Unlike the Web Panel, the visualization
for the Visu Panel is generated directly on the panel. The variables are
exchanged via an open fieldbus.
Commissioning is performed in the Web browser with the “Web-Based
Management WBM” software. During ongoing operation of the system that is to
be controlled, the target visualization is then displayed with e!RUNTIME. The
visualization and data exchange are programmed with e!COCKPIT on the
engineering PC. The visualization can also be provided to other display devices
through the integrated Webserver.
ETHERNET is used for communication with the engineering PC. Variables are
exchanged between the controller and Visu Panel via Modbus
®
, or alternatively
via network variables.
5.2 Control Panel
The Control Panel combines HMI and control functions, since it is a PLC as per
IEC 61131-3. Furthermore, four actuators/sensors can be connected to the four
digital I/Os. If more are needed, fieldbus nodes can be connected via the fieldbus
interfaces.
Commissioning is performed in the Web browser with the “Web-Based
Management WBM” software. During ongoing operation of the system that is to
be controlled, the target visualization, which was programmed on the engineering
PC with e!COCKPIT, is then displayed with e!RUNTIME. The visualization can
also be provided to other display devices through the integrated Webserver.
ETHERNET is used for communication with the engineering PC. Communication
with other controllers/couplers occurs over ETHERNET or a fieldbus.
5.3 Web Browser
The integrated Web browser displays the controller websites.
Up to 10 controllers can be configured in the WBM. The “PLC List”/”Browser
Favorites” is used to select a controller and to launch his Web visualization
directly.
The Web browser can display Web pages via encrypted connections (HTTPS).
The virtual keyboard opens automatically when an input field is actuated. The
user can use the “Switch keyboard” button to switch between levels (letters and
numbers).
The user can choose between the “virtual keyboard” and “CODESYS numpad
and keypad” in a CODESYS visualization.