User Manual

Touch Panel Advanced Line Service 189
762-5xxx/8000-000x TP 600
Manual
Version 1.3.0
11 Service
11.1 Changing the Configuration with the WBM
The button “CFG/RST” is on the left side. The button calls up the Web-Based
Management WBM to configure the device. The button must only be pressed
using a pointed non-metallic object.
During the visualization run-time, the WBM is called up.
When starting up the device (Power ON), the autostart list is stopped and the
device only starts the WBM. The button is not used to make any changes to the
settings.
You can also call up the WBM at any time with a swipe gesture on the touch
display.
11.2 Cleaning the Touch Screen
Because the touch screen is touching sensitive, it must be disabled for the
duration of the cleaning.
• • By swipe gesture from the top of the screen down a bit:
=> The menu from which screen cleaning is started appears for 5 sec.
=> A 15-sec. countdown starts. The screen can be cleaned during that
time.
A damp microfiber cloth must be used to clean the screen when needed.
Be careful when cleaning!
Do not use caustic cleaners, dilution, abrasives or hard objects that could
scratch!