User Manual

Touch Panel Advanced Line Properties 51
762-5xxx/8000-000x TP 600
Manual
Version 1.3.0
4.9.9.2 Interfaces Hardware PIO3
Table 30: Technical Data ‒ Interfaces Hardware PIO3
ETHERNET Interfaces X1 and X2
2 × RJ-45,witht Switch, 10/100 Mbit/s,
connecting cables twisted pair SF-UTP,
100 Ohms, category 5e, patch or
crossover, max. 100 m
Serial Interface RS-232/-485 X3
1 x D-Sub-9
CAN Interface X4
1 x D-Sub-9
USB Interfaces X6 and X7
2 × USB 2.0 Host (type A),
480 Mbit/s,
connecting cables max. 3 m, Current
draw max. 2 × 500 mA
„µSD“ Slot
For memory cards microSD and
microSDHC
4.9.10 Connectors
4.9.10.1 Connectors Hardware PIO2
Table 31: Technical Data ‒ Connectors Hardware PIO2
X5 voltage supply
3 × CAGE CLAMP
®
,
connection cable, max. 3 m to power supply,
conductor cross section: 0.14 … 1.5 mm
2
/ AWG 25
… 14,
strip length: 7 mm / 0.28 inch
X8 audio output
for headphones
3-pole stereo socket, 3,5 mm,
headphone output: 62.5 mW at 16 ohm,
frequency range: 20 … 20,000 Hz
4.9.10.2 Connectors Hardware PIO3
Table 32: Technical Data ‒ Connectors Hardware PIO3
X5 voltage supply
3 × CAGE CLAMP
®
,
connection cable, max. 3 m to power supply,
conductor cross section: 0.14 … 1.5 mm
2
/ AWG 25
… 14,
strip length: 7 mm / 0.28 inch
X8 audio output
for headphones
3-pole stereo socket, 3,5 mm,
headphone output: 62.5 mW at 16 ohm,
frequency range: 20 … 20,000 Hz
Four DIO X11 digital inputs
or outputs
10 × push-in CAGE CLAMP
®
,
4 inputs as per IEC 61131-2 type 1/outputs as high-
side switch, 24 V 0.5 A
conductor cross section: 0.2 … 1,5 mm² / AWG 24
… 14,
strip length: 8 … 9 mm / 0.31 … 0.35 inch