User Manual

Touch Panel Marine Line Commissioning 179
762-6xxx/8000-000x TP 600
Manual
Version 1.1.0
8.7.4.6.2 “Installed Private Keys” Group
Table 169: WBM “Configuration of OpenVPN and IPsec” Page – “Private Key List” Group
Parameters
Explanation
<private key name>
The loaded keys are displayed. If no keys has been
loaded. “No private keys existing” is displayed.
To select a file on the PC, click the [Choose file] button.
To transfer the selected file to the product, click [Upload] button. The changes
will be effective immediately.
The certificates are saved in the directory “/etc/certificates/” and the keys in the
directory “/etc/certificates/keys/”.
Click [Delete] to delete an entry. The changes will be effective immediately.
8.7.4.7 “Security Settings” Page
The network security settings are found on this page.
8.7.4.7.1 “TLS Configuration” Group
Table 170: WBM “Security > Security Settings” Page – “TLS Configuration” Group
Parameter
Explanation
TLS Configuration
Here you can set what TLS versions and
cryptographic methods are allowed for HTTPS.
Standard
The Webserver allows TLS 1.0,
TLS 1.1 and TLS 1.2, as well as
cryptographic methods that are no
longer considered secure.
Strong
The Webserver only allows TLS
Version 1.2 and strong algorithms.
Older software and older operating
systems may not support TLS 1.2.
Click the [Submit] button to apply a change. The change takes effect
immediately.
Information
BSI TR-02102 Technical Guidelines
The rules for the “Strong” setting are based on the TR-02102 technical
guidelines of the German Federal Office for Information Security (BSI).
You can find the guidelines on the Internet at: https://www.bsi.bund.de >
“Publications” > “Technical Guidelines.”