User Manual

Touch Panel Marine Line Commissioning 173
762-6xxx/8000-000x TP 600
Manual
Version 1.1.0
The changes only take effect after restarting the product. For this purpose, use
the WBM reboot function. Do not shut down the product too early!
8.7.4.2.1 “General Firewall Configuration” Page
8.7.4.3 “Global Firewall Parameters” Group
Table 160: WBM “General Firewall Configuration” Page – “Global Firewall Parameters” Group
Parameters
Explanation
Firewall enabled entirely
Enables/disables the complete functionality of the
firewall. This setting has the highest priority. If the
firewall is disabled, all other settings have no direct
effect. The configuration of the other parameters is
possible nevertheless so that you can set the
firewall parameters correctly before you enable the
firewall.
ICMP echo broadcast
protection
Enable or disable the “ICMP echo broadcast”
protection.
Max. UDP connections per
second
You can specify the maximum number of UDP
connections per second.
Max. TCP connections per
second
You can specify the maximum number of TCP
connections per second.
Click [Submit] to apply the change. The change is effective immediately.
8.7.4.3.1 “Interface Configuration” Page
These settings in this group refer to the configuration of the firewall at IP level.