User Manual

Touch Panel Marine Line Properties 39
762-6xxx/8000-000x TP 600
Manual
Version 1.1.0
4.7 Operating Elements
The panel is primarily operated from the touch screen. In addition, there are two
capacitive buttons for brightness control on the front of the panel.
You can find the operating mode switch and the “CFG/RST” button on the left
side.
External USB devices, e.g., a keyboard and mouse, can also be used to operate
the panel.
4.7.1 Mode Selector Switch
The Mode Selector Switch has the following positions:
Table 15: Positions Mode Selector Switch
Position
Actuation
Function
RESET Spring-return
Reset warm start or
Reset cold start
(depending on length of actuation, see Section
“Starting” > “Initiating Reset Functions”)
STOP Latching
Stop
All e!RUNTIME applications have stopped.
RUN Latching
Normal operation
e!RUNTIME applications running.
Using the button “CFG/RST” button you can initiate a “Factory Reset”. See
section „Service“ > „Factory Reset“.
4.7.2 “CFG/RST” Button
The “CFG/RST” button is installed inside a hole to prevent accidental operation. It
is a shortstroke button with a low actuating force of 1.1 N … 2.1 N (110 gf …
210 gf). The button can be actuated using a suitable object (e.g., a pen).
With the “CFG/RST” button, you can:
• Change the configuration with the WBM
• Restore the factory settings (“factory reset”)
Please refer to the sections of the same names further back in this manual for
information about the functions.