Datasheet

3
109
3
L 2 1 L 2 1
1L2 1L2
┌┐
┌─┐
┌┐
┌┬┐
┌─┐
L 2 1
L 3 N 1 2 L
L 3 N
L 3 N
N 3 L
L 3 N 1 2 L
L 3 N
L 3 N
N 3 L
L 3 N
1
2
L 3 N 1 2 L
L 3 N
L 3 N
N 3 L
L 3 N
1
2
L 3 N 1 2 L
L 3 N
L 3 N
N 3 L
L 3 N
1
2
L 2 1 L 2 1 L 2 1
1L21L2 1L2
WINSTA
®
MIDI
Shorting Plugs, 3-Pole
250 V/4 kV/3
I
N
25 A
Note:
If this shorting plug is connected to the 770-637 Distribu-
tion Connector as shown below, a motion sensor can be
connected instead of the switch.
Lockout cap, for plug, separable, 5-pole
yellow 770-360 100
Lockout cap, for plug, separable, 5-pole
yellow 770-360 100
Marking Item No. Pack. Unit Marking Item No. Pack. Unit
Cable assembly with coding S for connection to 770-637 Distri-
bution Connector when using 770-113/147-000 Shorting Plug.
Item-Specific Accessories
Application Notes
250 V/4 kV/3
I
N
25 A
Note:
Before finally connecting the switches, the shorting plugs
may be used to switch on or off.
Shorting plug,
brown plug with assembled strain relief housing
770-1373/146-000 50
770-1373/147-000 50
770-1373/148-000 50
770-1373/149-000 50
Shorting plug, coding A,
black plug with assembled strain relief housing and bridge
770-113/147-000 50
Internal circuit of 770-638 Distribution Connector with possible
insertion positions of 770-1373/14x-000 Shorting Plug.
Internal circuit of 770-637 Distribution Connector with possible
insertion position of 770-1373/14x-000 Shorting Plug.
Internal circuit of 770-637 Distribution Connector with insertion
position of 770-113/147-000 Shorting Plug for connecting a
motion sensor.
Internal circuit of 770-637 Distribution Connector with insertion
position of 770-113/147-000 Shorting Plug for connecting a
switch with control lamp.
Cable assembly with coding S for connection to 770-637 and
770-638 Distribution Connectors.
Motion Detector Switch with
control lamp
Series
circuit
Single-pole
switch
Two-way
circuit