Datasheet

1
9
1
Marking
Snapping on distribution connector
Mounting plate installation
Push down strain relief clamp via 2.5 mm screwdriver alternately
on both sides.
Latch the top of the strain relief housing.
The printed marking of the connector is clearly visible in the
openings of the strain relief housing.
The distribution connectors snap together when attached to the
mounting plate.
Securing the mounting plate via fixing pins.
Push down strain relief clamp by hand.
All connectors (snap-in versions, PCB connectors, distribution
connectors) for fixed installations are factory-equipped with
locking levers to ensure plugs and sockets are securely locked.
Additional locking levers are only required for “flying leads”
(plug/socket).
Locking lever assembly
First insert wired connector into strain relief housing, then snap
clamp and cover.