Manualshelf

Datasheet

ManualsBrandsWAGO ManualsNetwork ConnectorsMains distributor Mains plug - Mains socket, Mains socket, Mains socket Total number of pins: 2 + PE Black 1 pc(s
201202203204205206207208209210
6
202
Preparation
Strain relief installation
Marking
Wired connector fitted in base of strain relief housing. Latch the top of the strain relief housing.
The printed marking of the connector is clearly visible in the
openings of the strain relief housing.
Tighten strain relief with screwdriver.
Latch wired connector onto the base of the strain relief housing.
Unscrew base of strain relief housing.
To terminate fine-stranded conductors, open clamping unit via
5.5 mm screwdriver and insert stripped conductor until it hits
backstop.
The following lengths are recommended:
1. Strip length, outer insulation = 80 mm
2. Strip length: = 13 mm
3. Extended ground conductor = 10 mm
Strain relief installation
WINSTA
®
MAXI, 831 Series
Handling: