Datasheet

9
221
9
%
772 Series
IDC Modules for Flat Cables
5 x 2.5 mm² / 5 x 4 mm² / 5 x 2.5 mm² + 2 x 1.5 mm²
– Supply Modules 224
– Tap-Off Modules, for WINSTA
®
MIDI Connectors 225
896 Series
IDC Modules for Flat Cable 3 x 2.5 mm²
– Supply and Tap-Off Modules 236, 237
895 Series
POWERBLOCK 10 for Flat Cable 5 x 10 mm²
– Supply and Tap-Off Modules 238
895 Series
POWERBLOCK 16 for Flat Cable 5 x 16 mm²
– Supply and Tap-Off Modules 240
893 Series
IDC Modules for Flat Cables
5 x 2.5 mm² + 2 x 1.5 mm² / 2 x 1.5 mm²
– Supply Module (KNX and Special Coding) 228, 232
– Tap-Off Modules (KNX and Special Coding) 229, 233
WINSTA
®
IDC
for Flat Cables up to 16 mm²
897 Series
Flat Cable 2 x 1.5 mm² 234
Flat cable 3 x 2.5 mm² 237
Flat Cable 5 x 2.5 mm² 226
Flat Cable 5 x 4 mm² 227
Flat Cable 5 x 10 mm² 239
Flat cable 5 x 16 mm² 241
Flat Cable 5 x 2.5 mm² + 5 x 1.5 mm
2
227, 230
Notice: - Installation connectors are designed for connection and disconnection while not under load.
- There is no hazard-inducing interchangeability with systems based on IEC 60309, IEC 60320, IEC 60906 and with national
connector and socket systems.
- Compliance with the standards (IEC 61535) does not guarantee hazard-preventing, non-interchangeability with installation
connector systems from various manufacturers.
- Installation connector systems are not a substitute for residential connector/socket systems.
- WINSTA
®
IDC connectors are not intended for installation in open or easily accessible areas.
Page