Datasheet

9
224
<_________ 62 _________>
<__ 30 __>
<______ 50 ______>
<___________ 82,5 ___________>
<___ 37,5 ___>
<____ 46,5 ____>
<_17_>
<_________
50
_________>
<_________54,6_________>
2 x 0.5 … 4 mm²
2
2 x 20 … 12 AWG
400 V/6 kV/3
I
N
25 A
L 9 mm / 0.35 in.
3 Approvals
Supply module, 5-pole
Tap-off module with phase selection, 3-pole
Tap-off module, 5-pole
Supply module with strain relief housing
4 ,
9 … 13 mm cable diameter,
Strip length, outer insulation: 55 mm
black 772-261 10
gray
6 772-264/060-000 10
red 772-267 10
blue 772-271 10
For suitable flat cables,
see pages 226 and 227
2
Conductor sizes: 0.5 … 4 mm² “s + f-st”
0.5 … 2.5 mm² “stranded”
3
For “International Certification Organizations” and
“Approvals – User Guide,” see page 300.
4
Strain relief housings for larger
cable diameters, see page 136.
5
6.0 mm Ø, 1 … 2.5 mm plate thickness
6
Full rated current can only be applied to a maxi-
mum of 3 poles!
Processing temperature: +5 °C … +40 °C
black Coding A (N 3 L1 L2 L3)
gray Coding B (N 3 L1 L2 L3)
blue Coding I (N 3 L DA- DA+)
red Coding P (N 3 L1 L2 L3)
For coding information, see page 284.
Fire load data available upon request.
WINSTA
®
IDC
Supply Modules with Strain Relief Housing, 5-Pole
1
772 Series
Color Item No. Pack. Unit
Item-Specific Accessories
Description
Info Dimensions
Mounting plate, for supply and tap-off modules
black 772-260 10
Fixing pin, for mounting plates
5 black 770-601 250
Operating tool, with insulated shaft,
(6.5 x 1.2) mm blade
green 210-636 1
1 NOTICE:
Only use identically coded supply and tap-off modules on the
same cable!
- Coding A and P (N 3 L1 L2 L3) are designed for a 400 V
three-phase current cable configuration.
- Coding I (N 3 L DA- DA+) is designed for up to 230 V and
dimming cable configurations.
- Coding B (N 3 L1 L2 L3) is designed for custom cable
configurations. Only modules with the same pole marking shall
be used within an application.