Datasheet

9
237
9
<_____________________ 350 _____________________>
<___________ 90___________>
LN3
<_______69________>
<_27_>
<___ 16,9 ___>
( 6,5 )
Flat cable 3 x 2.5 mm²
250 V
1 Approvals
Flat cable 3 x 2.5 mm² Flat cable PVC 3 x 2.5 mm²,
L + N + PE
light gray 897-231
Flat cable 3 x 2.5 mm², halogen-free,
L + N + PE
light gray 897-232
Flat cable end cover, plastic. Every cable end must be fitted
with an end cover.
transparent 897-230 10
Insulating tape for flat cables, for sealing contact holes in
flat cables.
black 897-900 10
Fixing clamp, for screw mounting
dark gray 897-839 200 (8 x 25)
Stripping pliers, remove 17 mm of the conductor insulation.
897-931 1
Cutter
897-972 1
Color Item No.
Description
Cut outgoing feeder cable, completely strip and insert conduc-
tors. Tighten screws firmly (observe 0.7 Nm of tightening torque).
Insert upper part into base until it hits the stop (which will click
when engaged).
Push down and lock lever. All 3 cores are contacted simultane-
ously.
Position the base and tighten screw, if necessary.
Insert flat cable accurately. The key in the base must match the
groove in the cable insulation.
Tap-off module fitted with WINSTA
®
MIDI socket (coding A),
with H35VV-F cable, 3.5 cm long, 3 x 2.5 mm²
black 896-233 10
white 896-234 10
For other lengths, please contact factory.
Tap-Off Module with WINSTA
®
MIDI Socket
Color Item No. Pack. Unit
Item-Specific Accessories
WINSTA
®
IDC
Flat Cables 3 x 2.5 mm
2
897 Series