Data Sheet

Data sheet | Item number:770-745/062-000
www.wago.com/770-745/062-000
06.12.2018Page /2 4
Connection data
Connection technology
Push-in CAGE CLAMP
®
Actuation type Operating tool
Push-in
Nominal cross section 4 mm²
Solid conductor 0.5 … 4 mm² / 20 … 12 AWG
Solid conductor, push-in termination 1.5 … 4 mm² / 16 … 12 AWG
Stranded conductor 0.5 … 2.5 mm² / 20 … 14 AWG
Fine-stranded conductor 0.5 … 4 mm² / 20 … 12 AWG
Fine-stranded conductor with ferrule with plastic collar 0.25 … 1.5 mm² / 20 … 16 AWG
Fine-stranded conductor with ferrule without plastic collar 0.25 … 2.5 mm² / 20 … 14 AWG
Fine-stranded conductor with ferrule, push-in termination, from 1.5 mm² / 16 AWG
Strip length 9 mm / 0.35 Inch
Note (strip length) see also packaging or instructions
No. of poles 5
Total number of connection points 10
Total number of potentials 5
Conductor entry direction to mating direction 0 °
Geometrical Data
Pin spacing 10mm (0.394inch)
Width 55.5 mm / 2.185 inch
Height 18.5 mm / 0.728 inch
Depth 36 mm / 1.417 inch
Mechanical data
Coding B
Mating force of a plug-in connection approx. 20 … 70 N (depending on pole number)
Retention force of a plug-in connection when locked: > 80N
Unmating force of a plug-in connection when unlocked: approx. 20 … 70 N (depending on pole number)
Gehäuseblechstärke 0.5 … 2 mm / 0.02 … 0.079 inch
Mounting type Snap-in
Marking N PE 3 2 1
Degree of protection IP20
Potential marking N PE 3 2 1
Plug connection
Contact type (pluggable connector) Female connector/socket
Connector connection type for conductors
Locking of plug-in connection locking lever