Data Sheet

Data sheet | Item number:770-774/071-000
www.wago.com/770-774/071-000
06.12.2018Page /2 4
Note:
All connectors for mounted installations (snap-in versions for lighting fixtures or devices, all types of PCB and distribution connectors) are factory-
equipped with locking levers to ensure plugs and sockets are securely locked. Additional locking levers are only required for flying leads (plug
/socket).
Other pole Other variants can be requested via the WAGO sales department or, if necessary, configured at https://configurator.wago.com/:
markings
Data
Electrical data
Ratings per IEC/EN 60664-1
Rated voltage (III / 3) 400 V
Rated impulse voltage (III / 3) 6 kV
Rated current 25 A
Legend (ratings) (III / 3) ≙ Overvoltage category III / Pollution degree 3
Connection data
Connection technology
Push-in CAGE CLAMP
®
Actuation type Operating tool
Push-in
Nominal cross section 4 mm²
Solid conductor 0.5 … 4 mm² / 20 … 12 AWG
Solid conductor, push-in termination 1.5 … 4 mm² / 16 … 12 AWG
Stranded conductor 0.5 … 2.5 mm² / 20 … 14 AWG
Fine-stranded conductor 0.5 … 4 mm² / 20 … 12 AWG
Fine-stranded conductor with ferrule with plastic collar 0.25 … 1.5 mm² / 20 … 16 AWG
Fine-stranded conductor with ferrule without plastic collar 0.25 … 2.5 mm² / 20 … 14 AWG
Fine-stranded conductor with ferrule, push-in termination, from 1.5 mm² / 16 AWG
Strip length 9 mm / 0.35 Inch
Note (strip length) see also packaging or instructions
No. of poles 4
Total number of connection points 8
Total number of potentials 4
Conductor entry direction to mating direction 0 °
Geometrical Data
Pin spacing 10mm (0.394inch)
Width 45.5 mm / 1.791 inch
Height 18.5 mm / 0.728 inch
Depth 36 mm / 1.417 inch