Data Sheet

Data sheet | Item number:770-844/060-000
www.wago.com/770-844/060-000
06.12.2018Page /2 4
All connectors for mounted installations (snap-in versions for lighting fixtures or devices, all types of PCB and distribution connectors) are factory-
equipped with locking levers to ensure plugs and sockets are securely locked. Additional locking levers are only required for flying leads (plug
/socket).
Other pole Other variants can be requested via the WAGO sales department or, if necessary, configured at https://configurator.wago.com/:
markings
Data
Electrical data
Ratings per IEC/EN 60664-1
Rated voltage (III / 3) 400 V
Rated impulse voltage (III / 3) 6 kV
Rated current 25 A
Legend (ratings) (III / 3) ≙ Overvoltage category III / Pollution degree 3
Connection data
No. of poles 4
Total number of potentials 4
Number of levels 1
Geometrical Data
Pin spacing 10mm (0.394inch)
Width 37 mm / 1.457 inch
Height 29.5 mm / 1.161 inch
Height from the surface 26 mm / 1.024 inch
Depth 14.6 mm / 0.575 inch
Solder pin length 3.5 mm
Solder pin dimensions 1 x 0.8 mm
Drilled hole diameter (tolerance)
1.5 mm
(+ 0.1 ... - 0.1)

Mechanical data
Coding B
Mating force of a plug-in connection approx. 20 … 70 N (depending on pole number)
Retention force of a plug-in connection when locked: > 80N
Unmating force of a plug-in connection when unlocked: approx. 20 … 70 N (depending on pole number)
Design straight
Marking N 2|L 1|L'
Degree of protection IP20
Potential marking N 2/L 1/L'