Datasheet

28
1
28
1
10 20 30 40 50 60 70 80 90 100105
0
5
10
15
20
Volume 2
THR PCB Terminal Blocks with Push-Buttons, 0.75 mm
2
Pin Spacing: 4 mm
2060 Series
● THR PCB terminal blocks with Push-in CAGE CLAMP
®
and push-buttons
● Push-in termination of solid and ferruled conductors
● Convenient termination/removal of fine-stranded conductors via
push-buttons
● Just 4.5 mm high
● Available in tape-and-reel packaging for automated assembly
● Also suitable for wave soldering
Technical data:
Pin Spacing
4 mm
0.157 in.
Ratings per
IEC/EN 60664-1
Overvoltage category
III III II
Pollution degree
3 2 2
Rated voltage
63 V 160 V 320 V
Rated surge voltage
2.5 kV 2.5 kV 2.5 kV
Nominal current
9 A 9 A 9 A
Approvals per
UL 1977
Rating voltage, 1-pole
600 V*
Rating voltage, 2 or more poles
250 V*
Nominal current UL
9 A*
Material data:
Material group I
Insulating material Glass-fiber-reinforced polyphthalamide (PPA-GF)
Flammability rating per UL 94 V0
Lower/Upper limit temperature -60 °C / +105 °C
Contact material Copper alloy
Contact plating tin-plated
Conductor data:
Connection technology Push-in CAGE CLAMP
®
Conductor size: solid 0.2 … 0.75 mm
2
Conductor size: fine-stranded 0.2 … 0.75 mm
2
Conductor size: fine-stranded 0.25 … 0.34 mm
2
(with insulated ferrule)
Conductor size: fine-stranded 0.25 … 0.34 mm
2
(with uninsulated ferrule)
AWG 24 … 18
Strip length 6 … 7 mm / 0.24 … 0.28 in.
Conductor entry angle 0° to PCB
Solder pin: length/width 2.4 mm / 1.2 x 0.75 mm
Solder pin: metal-plated hole 1.5
+0.1
mm Ø
Outer diameter of metal-plated PCB hole min. 2.4 mm
Application notes:
Suitable for lead-free, reflow-soldering profiles acc. to DIN EN 61760-1 and IEC 60068-2-58 up to max. 260 °C peak
temperature. Due to customer specific variables (e.g., component configuration and orientation, type of soldering machine,
solder paste), it is recommended that trial runs are conducted to ensure product and process compatibility under actual
manufacturing conditions.

Recommendation for stencil: Material thickness, 150 µm.
The stencil hole diameter is identical to the outer diameter of the metal-plated PCB hole.
2060 Series accessories: Volume 2/Pages:
Operating tool (206-860) 218
Operating tool (2060-189) 218
Current-Carrying Capacity Curve
Pin spacing: 4 mm / Conductor size: 0.75 mm
2
"f-st"
Based on: EN 60512-5-2 / Reduction factor: 1
Ambient operating temperature in °C
Conductor rated
current
2-, 4-, 6-pole
Current in A
Approvals are available online at: www.wago.com For more technical information, see Full Line Catalog, Volume 2, Section 13 *UL/CSA approval pending