Electrical Interconnection Supplementary Catalog to Full Line Catalogs, Volumes 1/2/5 Edition 2016/1 2 Automation Technology Full Line Catalog, Volume 3 – Edition 2015/2016 Automation Technology PCB Terminal Blocks and Connectors 4 WINSTA® – The Pluggable Connection System Full Line Catalog, Volume 5 – Edition 2015/2016 Full Line Catalog 2015/2016 Full Line Catalog, Volume 4 – Edition 2015/2016 Full Line Catalog 2015/2016 Full Line Catalog, Volume 2 – Edition 2015/2016 WINSTA® – The Pluggable Con
The new items in this catalog supplement products found in the following main catalogs N 1/2/5 W e Ca yste m 5 tal Full Lin e Ca talog 2015 /2016 Full Lin ion S WINS TA® – Th e Plu ggab nn le Co ectio n Sy stem Volume 5 WINSTA - The Pluggable Connection System nect e Con gabl 15/2016 Plug The 5 – Edition 20 e A® – INST og, Volum ors PCB Te e Ca talog , Volum 2 e2– Full Lin e Ca talog 2015 /2016 Full Lin nect d Con16 s an /20 BlockEdition 2015 PCB Term inal s Block
CONTENTS Rail-Mounted Terminal Block Systems Volume 1 02 Connectors and PCB Terminal Blocks Volume 2 26 WINSTA® - The Pluggable Connection System Volume 5 36 Marking Accessories 42 Item Numbers 44
Volume 1
TOPJOB® S Shield Terminal Blocks, 2.5 mm² (AWG 12) 2002 Series 04 TOPJOB® S Double-Deck Terminal Blocks, 2.
0.25 … 2.5 (4) mm² 1 AWG 22 … 12 Terminal block width 5.2 mm / 0.205 in L 10 … 12 mm / 0.43 in 2 0.25 … 2.5 (4) mm² 1 AWG 22 … 12 Terminal block width 5.2 mm / 0.205 in L 10 … 12 mm / 0.43 in 2 32,9 mm/ 1.3 in Volume 1 4 32,9 mm/ 1.3 in 1 TOPJOB® S Shield Terminal Blocks 2.5 (4) mm² 2002 Series 22,2mm/0.87in 50,8 mm/2 in Item No. 2-conductor shield terminal block white 2002-1208 1 Conductor sizes: 0.25 mm² … 4 mm² “s + f-st”; Push-in conductor sizes: 0.75 mm² … 4 mm² “s” and 0.75 mm² … 2.
X-COM®S-SYSTEM-MINI 2-Conductor/1-Pin Carrier Terminal Blocks 2020 Series 0.14 … 1 AWG 24 … 16 Terminal block width 3.5 mm / 0.138 in L 9 … 11 mm / 0.39 in 4 5 (1.5) mm² 1 AWG 24 … 16 Terminal block width 3.5 mm / 0.138 in L 9 … 11 mm / 0.39 in 4 Volume 1 0.14 … 1 (1.5) mm² 1 500 V/6 kV/3 2 IN 13.5 A 3 2 1 Conductor sizes: 0.14 mm² … 1.5 mm² “s + f-st”; Push-in conductor sizes: 0.5 mm² … 1.5 mm² “s” and 0.5 mm² … 0.75 mm² “insulated ferrule, 10 mm” 32,5 mm/ 1.28 in 32,5 mm/ 1.
1 Commoning: Signal Level Commoning: Potential Level Volume 1 6 Sensor and Actuator Terminal Blocks 2000 Series Commoning the signal level with push-in type jumper bars (2000 Series); models with an LED can only be commoned in one jumper slot! TOPJOB® S test plug adapter can be used in all jumper slots. Upper level: two independent signal passages Commoning the potential levels via push-in type jumper bars (2000 Series).
1 Commoning: Potential Level 7 Volume 1 – Description and Handling – Continuous commoning in the potential levels via push-in type jumper bars for even pole numbers (2000 Series) Potential levels: two adjacent commoning options on a current bar 4-conductor sensor terminal block with ground contact Ground Commoning For sensor and actuator terminal blocks without ground connection to the DIN-rail, the ground connection can be performed by commoning to the terminal block with a ground foot.
0.14 … 1 (1.5) mm² 1 250 V/4 kV/3 2 IN 13.5 A AWG 24 … 16 300 V, 10 A Terminal block width 7 mm / 0.276 in 3 L 9 … 11 mm / 0.39 in 4 0.14 … 1 24 VDC IN 13.5 A (1.5) mm² 1 Note: The double pin spacing of this terminal block series allows, e.g., ten sensors to be connected using only five sensor terminal blocks plus power supply terminal block. AWG 24 … 16 24 VDC, 10 A Terminal block width 7 mm / 0.276 in 3 L 9 … 11 mm / 0.39 in 4 1 Conductor sizes: 0.14 mm² … 1.
TOPJOB® S 4-Conductor Sensor Terminal Blocks 1 (1.5) mm² 2000 Series 0.14 … 1 24 VDC IN 13.5 A AWG 24 … 16 300 V, 10 A Terminal block width 7 mm / 0.276 in 3 L 9 … 11 mm / 0.39 in 4 (1.5) mm² 1 9 Note: The double pin spacing of this terminal block series allows, e.g., ten sensors to be connected using only five sensor terminal blocks plus power supply terminal block. AWG 24 … 16 24 VDC, 10 A Terminal block width 7 mm / 0.276 in 3 L 9 … 11 mm / 0.39 in 4 52,4 mm/2.06 in 52,4 mm/2.
0.14 … 1 (1.5) mm² 1 250 V/4 kV/3 2 IN 13.5 A 0.14 … 1 24 VDC IN 13.5 A AWG 24 … 16 300 V, 10 A Terminal block width 7 mm / 0.276 in 3 L 9 … 11 mm / 0.39 in 4 (1.5) mm² 1 Note: The double pin spacing of this terminal block series allows, e.g., ten sensors to be connected using only five sensor terminal blocks plus power supply terminal block. AWG 24 … 16 24 VDC, 10 A Terminal block width 7 mm / 0.276 in 3 L 9 … 11 mm / 0.39 in 4 1 Conductor sizes: 0.14 mm² … 1.
TOPJOB® S Double-Deck Terminal Blocks 2.5 (4) mm² 2002 Series 1 0.25 … 2.5 (4) mm² 1 AWG 22 … 12 AC/DC 1000 V/ DC 1500 V/12 kV/3 2 IN 24 A Terminal block width 7.2 mm / 0.283 in. L 10 … 12 mm / 0.43 in. 3 53,3 mm/2.1 in 1 Conductor sizes: 0.25 mm² … 4 mm² “s + f-st”; Push-in conductor sizes: 0.75 mm² … 4 mm² “s” and 0.75 mm² … 2.
1 Volume 1 12 TOPJOB® S Connectors and Connector Strips 2000 Series 0.14 … 1 (1.5) mm² 1 500 V/6 kV/3 2 IN 13.5 A 0.14 … 1 (1.5) mm² 1 500 V/6 kV/3 2 IN 13.5 A AWG 24 … 16 Terminal block width 3.5 mm / 0.138 in. L 9 … 11 mm / 0.39 in. 3 AWG 24 … 16 Terminal block width 5 mm / 0.197 in. L 9 … 11 mm / 0.39 in. 3 1 Conductor sizes: 0.14 mm² … 1.5 mm² “s + f-st”; Push-in conductor sizes: 0.5 mm² … 1.5 mm² “s” and 0.5 mm² … 0.
Volume 1 1 13
Volume 1 14 Adjacent jumper for continuous 800 V/8 kV/3 IN 25 A Collective Carrier for Jumpers Push-in type jumper bar 18 mm/ 0.71 in 1 TOPJOB® S Adjacent Jumpers for Continuous Commoning, Collective Carriers for Jumpers and Push-in Type Jumper Bars 2002 and 2009 Series 68 mm/2.69 in Item No. Pack. Unit Item No. Pack.
TOPJOB® S Disconnect and Blind Plugs for Carrier Terminal Blocks, 2006 Series Plastic Carrier Rails, 210 Series Item No. Pack. Unit Item No. Pack. Unit Plastic carrier rail, 35 x 15 mm, 2,3 mm thick, 2 m long Not suited for use with ground terminal blocks! 100 (4x25) unslotted 210-509 1 2,2- 2,5 _____> < <____ 35 ____> Carrier terminal block with blind plug in disconnect position. > <_ Carrier terminal block with disconnect plug in operating position. Pack. Unit Item No.
50 … 185 mm² AWG 1/0 … 350 kcmil 1000 V AC/DC/1500 VDC/12 kV/3 1 IN 353 A 50 … 185 mm² AWG 1/0 … 350 kcmil 1000 V AC/DC/1500 VDC/12 kV/3 1 IN 353 A Terminal block width 32 mm / 1.26 in. L 45 … 47 mm / 1.77 … 1.85 in. 2 Terminal block width 32 mm / 1.26 in. L 45 … 47 mm / 1.77 … 1.85 in. 2 123 mm/4.84 in Volume 1 16 123 mm/4.84 in 4 High-Current Through Terminal Blocks with Screw Flanges 185 mm² 285 Series 170 mm/6.69 in Item No. 170 mm/6.69 in Pack.
Power Tap 10 (16) mm² for 185 mm² High-Current Terminal Blocks 285 Series 17 AWG 24 … 8 Volume 1 0.2 … 10 (16) mm² 1000 V/8 kV/3 1 IN 57 A 4 Module width 20 mm / 0.787 in. L 12 … 13 mm / 0.49 in. 2 1 1000 V = rated voltage 8 kV = rated surge voltage 3 = pollution degree (see Full Line Catalog, Volume 1, Section 14) 2 Strip length, see packaging or instructions. Item No. Pack.
12 PUSH WIRE® Connectors for Junction Boxes and Solid Conductors up to 4 mm² 773 Series 1.5 … 4 mm² 400 V/4 kV/2 IN 32 A “s” 1.5 … 4 mm² 400 V/4 kV/2 IN 32 A l 12 mm / 0.47 in. “s” 1.5 … 4 mm² 400 V/4 kV/2 IN 32 A Pack. Unit Item No. PUSH WIRE® connector for junction boxes and solid conductors up to 4 mm², 2-conductor connector, transparent brown housing, white cover 773-602 100 Color “s” l 12 mm / 0.47 in. l 12 mm / 0.47 in. Pack. Unit Item No.
PUSH WIRE® Connectors for Junction Boxes, 773 Series – Description and Installation – $ 12 PUSH WIRE® connection Strip solid conductor to 12 mm. Termination: Insert stripped, solid conductor fully. 19 Volume 1 Stripped length PUSH WIRE® connection Removal: Hold conductor to be removed and twist alternately left and right while pulling the connector out. Testing Cover use as end plate. Snapping on to carrier rail. Removing from the carrier rail.
12 Volume 1 20 Types of Assembly Mounting Carrier 221 Series Inserting connectors into the mounting carriers. Removing connectors from the mounting carrier. Removing splicing connector from the mounting carrier. Mounting of strain relief plate (222-505) to the mounting carrier. Snapping the angled DIN-rail adapter on the mounting carrier. Testing connectors via test slots on top of the carrier. Strain relief by cable tie on the carrier, transverse to the connector‘s wiring direction.
Mounting Carrier 221 Series 12 21 77,6 mm/3.06 in Color Item No. Mounting carrier, 17.5 mm wide, for 2-, 3-, 5-conductor compact splicing connectors orange 221-500 21,5 mm/ 0.85 in 67,5 mm/2.66 in Pack. Unit 50 (5x10) Item-Specific Accessories Self-adhesive marking strips, plain, Height of marking strip: 5 mm, 48 selfadhesive strips per card 1 210-334 white Color Item No. Volume 1 Angled DIN-rail adapter 52 mm/2.04 in Strain relief plate 25,5 mm/ 1 in Mounting carrier 42 mm/1.
Side 1: 32 x 0.08 … 1.5 mm² AWG 28 … 16 Side 2: 32 x 0.08 … 1.5 mm² AWG 28 … 16 800 V/8 kV/3 1 IN 10 A L 10 mm / 0.39 in. 1 800 V = rated voltage 8 kV = rated surge voltage 3 = pollution degree (see Full Line Catalog, Volume 1, Section 14) 2 See application notes in Full Line Catalog, Volume 1, for: Decade marker carrier, page 416 Pack. Unit Item No.
Busbar Carriers with T-Connector (Flexible) and T-Connector 790 Series 23 T-connector Volume 1 Busbar carriers with T-connector, flexible 13 Application example Pack. Unit Item No. Busbar carrier with T-connector, flexible, for busbars Cu 10 mm x 3 mm, distance between center of DIN-rail and busbar carrier: 70 mm, height: 56 mm 790-350/790-398 12 Pack. Unit Item No.
13 Shield Clamping Saddles with Spring 790 Series Shield clamping saddle diameter of compatible conductor 3 … 8 mm Item No. Shield clamping saddle diameter of compatible conductor 5 … 16 mm Pack. Unit Shield clamping saddle diameter of compatible conductor 5 … 20 mm Pack. Unit Item No. Shield clamping saddle, 12.4 mm wide Note: Cannot be used for connecting ground conductors and strain relief. 790-208 50 Item No. Shield clamping saddle, 21.
13 Volume 1 25 Application example Shield clamping saddles are available in three different sizes for shield diameters ranging from 3 … 20 mm. Compress the clamping saddle until fully engaged. Mount the clamping saddle onto the 10 x 3 mm busbar. Push the lateral actuating elements to release the spring and secure the clamping saddle on the busbar.
Volume 2
THR PCB Terminal Blocks with Push-Buttons 0.75 mm2, 4 mm Pin Spacing, White and Black 2060 Series 28 THR PCB Terminal Blocks with Push-Buttons 0.75 mm2, 8 mm Pin Spacing, White and Black 2060 Series 30 Board-to-Board Links for SMD PCB Terminal Blocks with Push-Buttons, Pin Spacing: 4 mm, 8 mm, White 2060 Series 32 THR PCB Terminal Blocks 1.
1 ● Volume 2 28 THR PCB Terminal Blocks with Push-Buttons, 0.75 mm2 Pin Spacing: 4 mm 2060 Series ● ● T HR PCB terminal blocks with Push-in CAGE CLAMP® and push-buttons Push-in termination of solid and ferruled conductors onvenient termination/removal of fine-stranded conductors via C push-buttons ● Just 4.5 mm high ● Available in tape-and-reel packaging for automated assembly ● Also suitable for wave soldering Technical data: 4 mm 0.157 in.
THR PCB Terminal Blocks with Push-Buttons, 0.75 mm2 1 Pin spacing: 4 mm / 0.157 in. Pin spacing: 4 mm / 0.157 in. 24 … 18 AWG 0.2 … 0.75 mm2 0.2 … 0.75 mm2 6,1 2,1 1,5 Ø_____ _ < <_ 1,2 0,4 < ___> > 7,85 < R 4 1,6 9,2 1,5 Ø_____ _ < 4 9,2 9,2 > 11 < <__ 24 __> 4 1,6 4,5 4 1,6 4 6,1 2,1 2,2 4,5 4 2,4 1,2 L < A> L = (pole no. x pin spacing) – 0.1 mm R = Feed direction A = (pole no. x pin spacing) + 4 mm Pole Item No. Pack. Unit No.
1 ● Volume 2 30 THR PCB Terminal Blocks with Push-Buttons, 0.75 mm2 Pin Spacing: 8 mm 2060 Series ● ● T HR PCB terminal blocks with Push-in CAGE CLAMP® and push-buttons Push-in termination of solid and ferruled conductors onvenient termination/removal of fine-stranded conductors via C push-buttons ● Just 4.5 mm high ● Available in tape-and-reel packaging for automated assembly ● Also suitable for wave soldering Technische Daten 8 mm 0.314 in.
THR PCB Terminal Blocks with Push-Buttons, 0.75 mm2 1 Pin spacing: 8 mm / 0.314 in. Pin spacing: 8 mm / 0.314 in. 24 … 18 AWG 0.2 … 0.75 mm2 0.2 … 0.75 mm2 <4,5 > 1,6 > <___ 9,2 ___> <___ 8 ___> 1,2 > <___ <___ 8 ___> <___ 9,2 ___> 1,5 Ø_____ _ < 1,2 > <___ <___ 8 ___> <___ 9,2 ___> 1,5 Ø_____ _ < <_ < A > R = Feed direction A + 16 mm Pole Item No. Pack. Unit No.
2 ● Volume 2 32 Board-to-Board Links for SMD PCB Terminal Blocks with Push-Buttons, 0.
Board-to-Board Links for SMD PCB Terminal Blocks with Push-Buttons, 0.75 mm2 2 Pin spacing: 4 mm / 0.157 in. 250 V/9 A 630 V/6 kV/2 9 A <____________ 28 ____________> 2,6 < >__ 1 < >__ >_ 8 _< 600 V/9 A < 8,25 <<__ 11,5 __< < 4 > Pin spacing: 8 mm / 0.314 in. < 8,25 <<__ 11,5 __< <____________ 28 ____________> 160 V/2.5 kV/2 9 A Volume 2 33 2,6 < >__ 1 < >__ Inserting board-to-board link into terminal block. Pole No. Item No. Pack.
2 ● Volume 2 34 THR PCB Terminal Blocks with Push-Buttons, 1.5 mm2 Pin Spacing: 6 mm 2061 Series T HR PCB terminal blocks with Push-in CAGE CLAMP® and push-buttons ● Push-in termination of solid and ferruled conductors ● Push-buttons simplify termination/removal of all conductor types ● Just 5.6 mm tall ● Available in tape-and-reel packaging for automated assembly ● Also suitable for wave soldering ● Arrange groups of terminal blocks without pole loss Technical data: 6 mm / 0.24 in.
THR PCB Terminal Blocks with Push-Buttons, 1.5 mm2 2 Pin spacing: 6 mm / 0.24 in. Pin spacing: 6 mm / 0.24 in. 20 … 16 AWG 0.5 … 1.5 mm2 20 … 16 AWG 1 2 3 Solder pin length: 1.5 mm 2061-1641/998-404 2061-1642/998-404 2061-1643/998-404 5760 (9 x 640) 4320 (9 x 480) 2880 (9 x 320) ( 6 ( Pole Item No. Pack. Unit No. THR PCB terminal block with push-buttons in tape-and-reel packaging, black Solder pin length: 2.
Volume 5
WINSTA® MINI Locking Levers, Manually Operated 890 Series 38 WINSTA® MINI Intermediate Couplers, 4-Pole 890 Series 38 WINSTA® MIDI Snap-In Frames, 4-Pole 770 Series 39 WINSTA® MIDI special Distribution Connectors, 2-Pole 770 Series 39 WINSTA® System Box For Greater Building Technology Diversity 899 Series 40 Products highlighted in RED are new items for Spring 2016 Volume 5 Contents Volume 5
Locking levers, manually operated Volume 5 Intermediate couplers 400 V/6 kV/3 IN 16 A 1 Approvals Description Color Locking lever, Intermediate coupler, 4-pole Locking lever, for “flying leads,” manually operated black white Item No. 890-101 890-121 Pack. Unit Color Item No. Pack.
WINSTA® MIDI/MIDI special Snap-In Frames, 4-pole Distribution Connectors, 2-pole Plate thickness: 0.5 … 3 mm Cutout tolerance: + 0.1 mm 39 Snap-in frames – for 4-pole sockets and plugs Distribution connectors 250 V/4 kV/3 IN 25 A Volume 5 Cutout dimensions 4 1 Approvals <__16,6__> <____________42,75____________> Description Farbe Snap-in frame, 4-pole Distribution connector, 2-pole Snap-in frame, 4-pole black 770-319 white 770-339 Bestellnr. VPE 100 100 Color Item No. Pack.
10 WINSTA® System Box – For Greater Building Technology Diversity Volume 5 40 Building technology is confronting you with growing technical requirements and steadily increasing complexity. WAGO's new WINSTA System Box provides you with a variety of pluggable and compact electrical installation solutions, including power distribution, control and switching systems.
10 Volume 5 41 Example of a configured WINSTA® System Box WINSTA® KNX RJ-45 connector - Transparent covers available in two heights: 18 mm and 39 mm WINSTA® MIDI, 2-pole WINSTA® MIDI, 3-pole WINSTA® MIDI, 4-pole WINSTA® MIDI, 5-pole - Non-transparent covers available in two heights: 18 mm and 39 mm
Marking 42 WMB Inline markers Color Item No. Pack. Unit WMB Inline, plain, 3.5 mm, 2,300 WMB markers on roll white 2009-113 Markers for Phoenix Contact rail-mounted terminal blocks Markers for Weidmüller rail-mounted terminal blocks Color Color Item No. Pack. Unit WMB Inline markers for Phoenix Contact rail-mounted terminal blocks, plain, stretchable from 5 ... 5.
Marking 43 Self-adhesive marking strips Color Item No. Type Labels Pack. Unit Marking strip, self-adhesive, plain, 20 m on roll Color Shrink tube for conductor marking Item No. Pack. Unit Labels, plain, 25 x 50 mm, 500 markers on roll Color Item No. Pack. Unit Shrink tube for conductor marking, halogen-free, 2:1 shrink ratio Suitable ink ribbon 258-5005 20 m on roll 2.4 mm Ø, 0.25 … 0.75 mm² white yellow 211-500 1 211-500/000-002 1 1 1 3.2 mm Ø, 0.
Item Number Index 44 Item No.
45 Item No. 2061 Series 2061-1641/998-404 2061-1642/998-404 2061-1643/998-404 2061-1661/998-404 2061-1662/998-404 2061-1663/998-404 Page 35 35 35 35 35 35 Item No. Page Item No. Page Item No.
WAGO Worldwide 46 Algeria please contact WAGO France Argentina Bruno Schillig S.A. Arenales 4030, B1604CFD Florida, PBA Phone +54 11 4730 1100 Fax +54 11 4761 7244 wago@schillig.com.ar Austria WAGO Kontakttechnik Ges.m.b.H. Europaring F15 602 Campus 21 2345 Brunn am Gebirge Phone +43 1 6150780 Fax +43 1 6150775 info.at@wago.com Azerbaijan AZ Technics LTD Zulfi V. Alizade Y.Safarov str.33, AZ1025, Baku Republic of Azerbaijan Phone +994 12 496 8335 Fax +994 12 496 8334 info@AZtechnics.az Australia WAGO Pty.
Moldova Electroservice Slavinschi T.T. str. Bolgarskaia 9, office 6 2001 Kishinev Phone +373 22 274427 Fax +373 22 224481 es@es.mldnet.com Romania VDR & Servicii srl Str. Valeriu Branişte, nr. 60, ap.1, sector 3 Romania Phone +40 21 3225074/76 Fax +40 21 3225075 office@componente-automatizari.ro Slovenia Elektronabava d.o.o. Cesta 24 junija 3 1231 Ljubljana Phone +386 1 58 99 300 Fax +386 1 58 99 409 info@elektronabava.
Notes 48
Notes 49
Notes 50
Notes 1 51
is a registered trademark of WAGO Verwaltungsgesellschaft mbH.
Headquarters Sales Order Service Fax +49 571 887 - 0 +49 571 887 - 222 +49 571 887 - 333 +49 571 887 - 169 0888-1001/0116-6901 - Suppl. Cat. Electrical Interconnection 2016/1 US - 02/2016-00 - Printed in Germany - Subject to design changes WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 · D · 32385 Minden Hansastraße 27 · D · 32423 Minden info@wago.com www.wago.