Data Sheet

ManualsBrandsWAGO ManualsRack & DIN Rail Mount PSUsEPSITRON PRO DIN Rail Power Supply 24Vdc 10A, 1-Phase

Data sheet | Item number:787-832

Switched-mode power supply; Pro; 1-phase; 24 VDC output voltage; 10 A

output current; TopBoost + PowerBoost; DC OK contact

www.wago.com/787-832

06.12.2018Page /1 7

Item description

Features:

Switched-mode power supply with PowerBoost and TopBoost

Stand-by input for switching off the output and minimizing power consumption

DC OK contact for output monitoring

Suitable for both parallel and series operation

Natural convection cooling when horizontally mounted

Enclosed for use in control cabinets

Summary of content (7 pages)

PAGE 1
Data sheet | Item number: 787-832 Switched-mode power supply; Pro; 1-phase; 24 VDC output voltage; 10 A output current; TopBoost + PowerBoost; DC OK contact www.wago.
PAGE 2
Data sheet | Item number: 787-832 www.wago.com/787-832 Enclosed for use in control cabinets Electrically isolated output voltage (SELV) per EN 60950-1/UL 60950-1; PELV per EN 60204 Data Technical Data Input Phases 1 Nominal input voltage Ui nom 100 … 240 VAC Input voltage range 85 … 264 VAC; 120 … 373 VDC Nominal mains frequency range 50 … 60 Hz; 0 Hz Input current Ii ≤ 1.
PAGE 3
Data sheet | Item number: 787-832 www.wago.com/787-832 Efficiency/Power losses: Power loss Pv 0.8 W (stand-by); 3.8 W (no load); 24 W (nominal load) Efficiency 90 % Fuse protection: Internal fuse T 6.3 A / 250 VAC External fuse (required) an external DC fuse required for DC input voltage External fuse (recommended) Circuit breakers 6 A, 10 A, 16 A, characteristic: B or C Safety and protection: Insulation voltage (PRI-SEC) 4.242 kV DC Isolation voltage (PRI-GND) 2.
PAGE 4
Data sheet | Item number: 787-832 www.wago.com/787-832 Geometrical Data Width 57 mm / 2.244 inch Height 163 mm / 6.417 inch Length from upper-edge of DIN-35 rail 179 mm / 7.047 inch Note on dimensions Height iincluding female connector Mechanical data Type of mounting DIN-35 rail (EN 60715) in 2 positions Material Data Weight 1472.
PAGE 5
Data sheet | Item number: 787-832 www.wago.com/787-832 EPSITRON® wall mount adapter; for screw fixing of 787-8xx devices on mounting plate or wall without DIN 35 rail www.wago.com/787-895 Item no.: 787-896 Carrier rail adapter; for mounting 787-8xx devices to a DIN 35 rail www.wago.com/787-896 Item no.: 787-897 Carrier rail adapter made of zinc die-cast; for mounting 787-8xx devices to a DIN 35 rail www.wago.com/787-897 Marking accessories Item no.
PAGE 6
Data sheet | Item number: 787-832 www.wago.com/787-832 Item no.: 216-262 Ferrule; Sleeve for 0.75 mm² / AWG 20; insulated; electro-tin plated; electrolytic copper; gastight crimped; acc. to DIN 46228, Part 4/09.90 www.wago.com/216-262 Item no.: 216-263 Ferrule; Sleeve for 1 mm² / AWG 18; insulated; electro-tin plated; electrolytic copper; gastight crimped; www.wago.com/216-263 acc. to DIN 46228, Part 4/09.90 Item no.: 216-264 Ferrule; Sleeve for 1.
PAGE 7
Data sheet | Item number: 787-832 www.wago.com/787-832 8xx and 787-16xx power supply unit, the desired conductor size and associated fuse can be selected. The software tool then calculates the maximum conductor length at which the fuse functions correctly, while also considering the conductor and transfer resistances. The user can select a base load.