Data Sheet

Data sheet | Item number:821-104
TOPJOB® S subdistribution board set
www.wago.com/821-104
06.12.2018Page /1 2
Item description
Suitable for a sub-distribution board equipped with a residual current breaker (RCB). It includes all required components for wiring supply terminal
blocks and connecting nine AC circuits and one 3-phase circuit.
Distribution of FI potentials via one 10 x 3 mm N-busbar. Separation of N-potentials for insulation resistance measurement via N-disconnect slide
links within the multilevel installation terminal block.
Full Package Content
Quantity Item Number Description
10 2003-7641 Multilevel installation terminal block, NT/L/PE, 4 mm²/12 AWG
1 2003-7642 Multilevel installation terminal block, L/L, 4 mm²/12 AWG
1 2003-7692 End and intermediate plate
3 2016-7601 2-conductor supply terminal block for distribution boxes, gray, 16 mm²/4 AWG
1 2016-7604 2-conductor supply terminal block for distribution boxes, blue, 16 mm²/6 AWG
1 2016-7607 2-conductor ground terminal block, green-yellow, 16 mm²/6 AWG
1 2016-7692 End and intermediate plate
1 2016-7714 1-conductor N-disconnect terminal block, blue, 16 mm²/6 AWG
1 2016-7792 End and intermediate plate
1 249-117 End stop, 10 mm/0.394 in. wide
1 2009-305 Busbar carrier with end stop function
1 210-133 Busbar, tin-plated, 0.2 m
1 777-303 Cover for busbar, transparent, 0.2 m
1 2009-110 Marking strip, white, 0.5 m
1 793-5566 WMB marker card 1 ... 50
1 793-5472 WMB marker card L1, L2 ... N, PE
1 210-110 Felt-tip pen, smudge-proof