JUMPFLEX® – 857 Series One Profile, Many Possibilities
JUMPFLEX® – 857 Series A Complete Product Line is Available, Bringing Each Signal into Shape. Perfectly pairing a housing with electronics is key to a highly successful device. This is exactly what WAGO has achieved with the new 857 Series Transducers / Relay and Optocouplers Modules.
Transducers Millivolt transducer Threshold value switch Temperature transducers for RTD Temperature transducers for thermocouples Optocouplers AC/DC relay modules AC/DC relay modules with gold contacts JUMPFLEX® – The Intelligent Solution! 3
Effectively protected Requirement: Input circuit protection against overcurrent. JUMPFLEX® – Product: JUMPFLEX® – 857-409 Bipolar Isolator and 857-402 Universal Isolation Amplifier Solution: Input overcurrent protection via resettable fuse. The input circuit is effectively protected against overcurrent. Always right Requirement: Achieving constant precision values even after range switching. 0 ... 20 mA 4 ...
– Top Features Requirement: Reaching definable end values for analog standard signals. Ideally adjusted Product: JUMPFLEX® – 857-401 Software-Configurable Isolation Amplifier (with configurable digital output (DO)) 857-402 Universal Isolation Amplifier Solution: Clipping capability allows analog standard signal limitation to upper-range values. The perfect solution for any application.
JUMPFLEX® - Transducers – 857 Series Housed in a 6 mm-wide package, the 857 Series JUMPFLEX® Transducers feature eight CAGE CLAMP®S connections and a common profile. This enables usage of the same, flexible push-in jumpers for the entire JUMPFLEX® line – every conductor entry has a corresponding jumper slot. These system features provide a comprehensive and successful approach to signal conditioning.
Always right Laser-capable resistors eliminate recalibration. Flexibility at its finest Configuration via DIP switch or configuration tool. Industry‘s most compact “True“ 6.0mm (0.23 inch) width maximizes panel space. r extreme applications ended range of temperatures from -25°C +70°C to suit more applications. e “safe isolation“ age to EN 61140. S Vibration-proof – fast – maintenance-free CAGE CLAMP®S termination for all conductor types.
Isolation Amplifiers Description Item No.
Input Signal (configurable and calibrated) Output Signal (configurable and calibrated) Load Impedance Operating Frequency Voltage Supply VN 0 ... 20 mA, 4 ... 20 mA, 0... 5 V, 1 ... 5 V, 0 ... 10 V, 2 ... 10 V, 0 ... 20 mA, 4 ... 20 mA, 0... 5 V, 1 ... 5 V, 0 ... 10 V, 2 ... 10 V, 600 Ω (I-output) 2 kΩ (U-output) 100 Hz / > 5 kHz (configurable via DIP switch) 24 V DC -10 ... +10 V, -20 ... +20 mA, 0 ... +30 V 0 ... 20 mA, 4 ... 20 mA, 0 ... 10 V, 2 ... 10 V, 0... 5 V, 1 ... 5 V, 0 ... 10 mA, 2 ..
Temperature Transducers and Transducers with Specialty Signals Description Item No. Temperature transducer for Pt100, Pt200, Pt500 and Pt1000 as well as resistors 0 ... 1 kOhm; 0 ... 4.5 kOhm 1 Temperature transducer for Pt100, Pt200, Pt500 and Pt1000 as well as resistors 0 ... 1 kOhm; 0 ... 4.
Sensor Connection Sensor Temperature Range Output Signal Load Impedance Supply Voltage VN 2-wire, 3-wire, 4-wire (switchable) -200 °C ... +850 °C 0 ... 20 mA, 4 ... 20 mA, 0 ... 10 V, 2 ... 10 V, 0... 5 V, 1 ... 5 V, 0 ... 10 mA, 2 ... 10 mA ≤ 600 Ω (I-output) ≥ 2 kΩ (U-output) 24 V DC 2-wire, 3-wire, 4-wire (switchable) -200 °C ... +850 °C 0 ... 20 mA, 4 ... 20 mA, 0 ... 10 V, 2 ... 10 V, 0... 5 V, 1 ... 5 V, 0 ... 10 mA, 2 ...
JUMPFLEX® Transducer Parameter Setting Select JUMPFLEX® Transducers can also be parameterized via WAGOframe software tool. The WAGOframe FDT/DTM-based configuration tool provides parameterization, start-up and field device diagnostics. DTM device drivers, for the devices employed, are required to use the WAGOframe FDT frame application. 12 The WAGOframe FDT frame application provides a wizard, simplifying the operation of components, such as WAGO JUMPFLEX® DTMs.
Application Examples for Avoiding Corruption of Analog Signals In industrial applications, there are several requirements for safe and economical signal matching that demand appropriate solutions. This is precisely where the strengths of analog technology lie. For years it has been used successfully in all branches of industry, including factory automation and process technology.
JUMPFLEX® - Sockets with Miniature Switching Relay and Solid State Relay – 857 Series Housed in a 6mm-wide package, WAGO 857 Series relay and optocoupler modules offer the same dimensional outline. The modules also employ a flexible, in-line push-in jumper system, allowing both time and cost savings. An example of this is the ability to common power supply potentials for a group of relays and optocoupler modules, eliminating additional wiring.
Quick and easy replacement Pluggable relays and optocouplers Industry‘s most compact “True“ 6.0mm (0.23 inch) width maximizes panel space. Highly versatile Input voltage available in 5-230 V AC/DC variants moning, not discrete wiring e outline allows the usage single in-line, push-in jumper. n S Vibration-proof, fast and maintenance-free CAGE CLAMP®S termination for all conductor types.
Relays and Optocouplers Description Relay with 1 changeover contact Item No. Input Nominal Voltage VN Max. Switching Voltage Max.
Description Item No. Input Nominal Voltage VN Output Voltage Range Max. Continuous Current 857-704 24 V DC 0 V ... 48 V DC 100 mA 857-707 115 V AC/DC 0 V ... 48 V DC 100 mA 857-708 230 V AC/DC 0 V ... 48 V DC 100 mA 857-714 24 V DC 24 V ... 240 V AC 1A 857-717 115 V AC/DC 24 V ... 240 V AC 1A 857-718 230 V AC/DC 24 V ... 240 V AC 1A 857-724 24 V DC 0 V ... 24 V DC 2A 857-727 115 V AC/DC 0 V ... 24 V DC 2A 857-728 230 V AC/DC 0 V ...
750-1500 WAGO 857 Series Interface Adapter for System Wiring The WAGO Interface Adapter provides a fast wiring solution for relay and optocoupler modules within the JUMPFLEX® 857 Series. On the module side, preassembled WAGO Ribbon Cables (706 Series) connect to the WAGO-I/O-SYSTEM controllers. 857-981 DI - Simple plug-in connection via jumper slot - Combines 8 channels within a 857 Series module assembly - Integrated test ports for each channel WAGO-I/O -SYSTEM 750 WAGO Ribbon Cables Item No.
Accessories Push-in Type Jumper Bars, Operating Tool, WAGO USB Service Cable, Marking Push-in type jumper bars, light gray, insulated, 18 A Item no. suffix for colored push-in type jumper bars Comb-style jumper bar, insulated Operating tool, with partially insulated shaft WAGO USB service cable WAGOframe (Jumper for clamping units) 2-way 859-402 3-way 859-403 4-way 859-404 5-way 859-405 6-way 859-406 7-way 859-407 8-way 859-408 9-way 859-409 10-way 859-410 yellow ...
0888-0172/0004-3601 · JUMPFLEX® – 857 Series · 4.0 GB · 06/2012-00 · Printed in Germany · Subject to design changes WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 · 32385 Minden Hansastraße 27 · 32423 Minden Phone: Head Office Sales Order Service Technical Support +49 (0)571/887 - 0 +49 (0)571/887 - 222 +49 (0)571/887 - 333 +49 (0)571/887 - 555 Fax: +49 (0)571/887 - 169 E-mail: Online: info@wago.com www.wago.
