Datasheet

857-411, 857-412, 857-413, 857-414, 857-415, 857-416
3
226
JUMPFLEX
®
Transducers
Isolation amplifiers, fixed setting for voltage or current signals
<_________ 94 mm/3.68 in _________> 6 mm/0.23 in
<_________ 96 mm/3.76 in _________>
____________
_>
_>
OUT
IN
POWER
5
6
1
2
3
4
7
8
OUT+
GND 2
Us+
GND 3
IN+
GND 1
Us+
GND 3
Short description:
The pre-configured isolation amplifiers convert, amplify, filter and electrically
isolate standard analog signals.
Characteristics:
• Input/Output: current/voltage signal
• Safe 3-way isolation with 2.5kV test voltage to EN 61140
Description
Input signal Output signal Item No.
Pack.
Unit
JUMPFLEX
®
Transducer, for DIN 35 rail
Isolation amplifier 0(4) ... 20 mA 0(4) ... 20 mA 857-411 1
Isolation amplifier 0(2) ... 10 V 0(2) ... 10 V 857-412 1
Isolation amplifier 0 ... 10 V 0 ... 20 mA 857-413 1
Isolation amplifier 0 ... 10 V 4 ... 20 mA 857-414 1
Isolation amplifier 0 ... 20 mA 0 ... 10 V 857-415 1
Isolation amplifier 4 ... 20 mA 0 ... 10 V 857-416 1
Technical Data
Input:
Input signal 857-411: 0(4) ... 20 mA
857-412: 0(2) ... 10 V
857-413: 0 ... 10 V
857-414: 0 ... 10 V
857-415: 0 ... 20 mA
857-416: 4 ... 20 mA
Input resistance ≤ 50 Ω (I input)
≥ 100 kΩ (U input)
Output:
Output signal 857-411: 0(4) ... 20 mA
857-412: 0(2) ... 10 V
857-413: 0 ... 20 mA
857-414: 4 ... 20 mA
857-415: 0 ... 10 V
857-416: 0 ... 10 V
Load impedance ≤ 600 Ω (I output)
≥ 2 kΩ (U output)
General specifications:
Voltage supply V
S
24V DC
Supply voltage range 16.8 V ... 31.2 V
Current consumption at 24 V DC ≤ 25 mA
Max. operating frequency 100 Hz
Response time (T
10-90
) < 3.5 ms
Transmission error ≤ 0.1 % of upper range value
Temperature coefficient ≤ 0.01 % /K
Technical Data
Environmental requirements:
Ambient operating temperature -25 °C ... +70 °C
Storage temperature -40 °C ... +85 °C
Safety and protection:
Test voltage (input/output/supply) 2.5 kV AC, 50 Hz, 1 min
Connection and type of mounting:
Wire connection CAGE CLAMP
®
S
Cross sections solid:
0.08 mm² ... 2.5 mm² / AWG 28 ... 14
fine-stranded:
0.34 mm² ... 2.5 mm² / AWG 22 ... 14
Strip lengths 9 ... 10 mm / 0.37 in
Dimensions and weight:
Dimensions (mm) W x H x L 6 x 96 x 94
Height from upper-edge of DIN 35 rail
Weight 49.2 g
Standards and approvals:
Conformity marking 1
r UL 508
r ANSI/ISA 12.12.01 Class I, Div. 2, Grp. ABCD, T4
Shipbuilding g
Accessories see pages 268 ... 271
WAGO Kontakttechnik GmbH & Co. KG
Subject to design changes 01.07.2013
Postfach 2880 - D-32385 Minden
Hansastr. 27 - D-32423 Minden
Tel.: [phone] E-Mail: [e-mail]
Fax: [phone] www.wago.com