Datasheet

857-452
3
237
3
JUMPFLEX
®
Transducers
Passive isolator, 2 channels
<_________ 94 mm/3.68 in _________> 6 mm/0.23 in
<_________ 96 mm/3.76 in _________>
____________
_>
_>
OUT 1 IN 1
5
6
1
2
3
4
7
8
OUT 1+
GND 2
OUT 2+
GND 4
IN 1+
GND 1
IN 2+
GND 3
OUT 2 IN 2
Short description:
The 2-channel passive isolator filters and electrically isolates 0(4)–20 mA ana-
log standard signals, while drawing power for signal transmission from the input
circuit. The connected sensor supplies the passive isolator with the required
power, while powering the connected load.
Characteristics:
No additional supply voltage required
Safe 3-way isolation with 2.5kV test voltage to EN 61140
Description
Item No.
Pack.
Unit
JUMPFLEX
®
transducers, for DIN 35 rail 857-452 1
Passive isolator, 2 channels
Technical Data
Input: *
Input signal 0(4) ... 20 mA
Responce current < 200 μA
Voltage drop intput < 2.0 V at 20 mA (output)
Max. input voltage < 20 V
Max. input signal 40mA
Output: *
Output signal 0(4) ... 20 mA
Load impedance ≤ 600 Ω
(Temperature range restrictions may occur)
General specifications:
Max. operating frequency 100 Hz
Response time (T
10-90
) < 3.5 ms
Transmission error ≤ 0.1 % of the full scale value
Load error ≤ 0.05 % of upper range value
per 100 Ω load
Temperature coefficient ≤ 0.01 % /K
( * per channel)
Technical Data
Environmental requirements:
Ambient operating temperature -25 °C ... +70 °C
Storage temperature -40 °C ... +85 °C
Connection and type of mounting:
Wire connection CAGE CLAMP
®
S
Cross sections solid:
0.08 mm² ... 2.5 mm² / AWG 28 ... 14
fine-stranded:
0.34 mm² ... 2.5 mm² / AWG 22 ... 14
Strip lengths 9 ... 10 mm / 0.37 in
Dimensions and weight:
Dimensions (mm) W x H x L 6 x 96 x 94
Height from upper-edge of DIN 35 rail
Weight 37.8 g
Standards and approvals:
Conformity marking 1
r UL 508
r ANSI/ISA 12.12.01 Class I, Div. 2, Grp. ABCD, T4
Shipbuilding g
Accessories see pages 268 ... 271
WAGO Kontakttechnik GmbH & Co. KG
Subject to design changes 01.07.2013
Postfach 2880 - D-32385 Minden
Hansastr. 27 - D-32423 Minden
Tel.: +49(0)571/887-0 E-Mail: info@wago.com
Fax: +49(0)571/887-169 www.wago.com

Summary of content (1 pages)