Data Sheet

Data sheet | Item number:857-704
www.wago.com/857-704
06.12.2018Page /2 12
Note:
Optocouplers and solid state relays are designed for use in signal processing networks, which are not supplied by the low-voltage power supply
networks.
Data
Technical Data
Control circuit
Nominal input voltage U
N
24 VDC
Input voltage range (low level) 0 … 10 VDC
Input voltage range (high level) 16.8 … 30 VDC
Nominal input current at U
N
9 mA
Load circuit:
Circuit type 2-conductor termination
Limiting continuous current 0.1 A
Output voltage range 0 … 48 VDC
Max. voltage drop at output ≤ 1 VDC
Min. switching current 50 µA
Turn-on time ≤ 100 µs
Drop-out time ≤ 600 µs
Switching frequency ≤ 1 kHz
Signaling
Status indication LED yellow
Safety and protection:
Dielectric strength, control/load circuit (AC, 1 min) 3.75 kV
rms
Dielectric strength, control/load circuit (AC, 1 min) 3.75 kV
rms
Degree of protection IP20
Connection data
Connection technology
Push-in CAGE CLAMP
®
Solid conductor 0.34 … 2.5 mm² / 22 … 14 AWG
Fine-stranded conductor 0.34 … 2.5 mm² / 22 … 14 AWG
Strip length 9 … 10 mm / 0.35 … 0.39 Inch