Datasheet

Data sheet | Item number:890-105
www.wago.com/890-105
12.12.2018Page /2 5
Ratings per IEC/EN 60664-1
Rated voltage (III / 3) 400 V
Rated impulse voltage (III / 3) 6 kV
Rated current 13 A
Legend (ratings) (III / 3) ≙ Overvoltage category III / Pollution degree 3
Connection data
Connection technology
Push-in CAGE CLAMP
®
Actuation type Operating tool
Push-in
Nominal cross section 1.5 mm²
Solid conductor 0.25 … 1.5 mm² / 22 … 16 AWG
Solid conductor, push-in termination 0.75 … 1.5 mm² / 20 … 16 AWG
Stranded conductor 0.25 … 1 mm² / 22 … 18 AWG
Fine-stranded conductor 0.25 … 1.5 mm² / 22 … 16 AWG
Fine-stranded conductor with ferrule with plastic collar 0.25 … 0.75 mm² / 22 … 20 AWG
Fine-stranded conductor with ferrule without plastic collar 0.25 … 0.75 mm² / 22 … 20 AWG
Fine-stranded conductor with ferrule, push-in termination, from 0.75 mm² / 20 AWG
Strip length 9 mm / 0.35 Inch
Note (strip length) see also packaging or instructions
No. of poles 5
Total number of connection points 5
Total number of potentials 5
Connectable sheathed cable diameter 6.5 … 10.5 mm
Conductor entry direction to mating direction 0 °
Strip length 45 mm
Geometrical Data
Pin spacing 4.4mm (0.173inch)
Width 26.7 mm / 1.051 inch
Height 15.8 mm / 0.622 inch
Depth 71.9 mm / 2.831 inch
Mechanical data
Coding A
Mating force of a plug-in connection approx. 20 … 70 N (depending on pole number)
Retention force of a plug-in connection when locked: > 80N
Unmating force of a plug-in connection when unlocked: approx. 20 … 70 N (depending on pole number)
Marking N 1 2 3
Degree of protection IP20