Technical data

Supplementary Power Supply Regulations • 37

Fusing

WAGO-I/O-SYSTEM 750

INTERBUS

2.7.4 Supplementary Power Supply Regulations

The WAGO-I/O-SYSTEM 750 can also be used in shipbuilding or offshore

and onshore areas of work (e. g. working platforms, loading plants). This is

demonstrated by complying with the standards of influential classification

companies such as Germanischer Lloyd and Lloyds Register.

Filter modules for 24-volt supply are required for the certified operation of the

system.

Item No. Name Description

750-626 Supply filter Filter module for system supply and field supply (24 V, 0 V), i.e.

for field bus coupler/controller and bus power supply (750-613)

750-624 Supply filter Filter module for the 24 V- field supply

(750-602, 750-601, 750-610)

Therefore, the following power supply concept must be absolutely complied

with.

Fig. 2-22: Power supply concept g01xx11e

Note

Another potential power terminal 750-601/602/610 must only be used behind the

filter terminal 750-626 if the protective earth conductor is needed on the lower

power contact or if a fuse protection is required.