® ® DIGI-STEM Thermometer and Transmitter Systems Measure Process Temperatures with Digital Accuracy Rigid & Remote Sensor Systems RTD or Thermocouple Output www.palmerwahl.
Digi-Stem® Introduction Digi-Stem® Thermometers and Transmitters • Selectable Stems, Integral or Remote • Large 1 inch LCD Continuous Display • Easy to Read from Over 20 Feet • Battery Operated • Meter Accuracies from ±0.3°F (±0.
Digi-Stem® Introduction Digi-Stem® Thermometers and Transmitters Remote Sensor Systems Digi-Stem is offered in a variety of configurations to measure process temperatures remotely located from the meter. Optional remote sensor cables are available with different stem configurations. Stems can be specified for a variety of process connections or interfaces, including different thermowell adapters, penetration probes and immersion probes. See Ordering Guide on pages 5 and 6.
Digi-Stem® Meter Specifications Meter Specifications Battery Powered Display DST200 Model Display Transmitters DST300 DST310 DSX300 DSX310 Standard ˚F or ˚C 0.0 to 199.9°F -20.0 to 130˚C 0.0 to 300°F 200 to 800°F 100 to 425°C 0.0 to 300°F -18.0 to150°C 200 to 800°F 100 to 425°C Option Option DSA20: 0.0 to 199.9°C Option DSA21: -20.0 to 150°C Option DSA 30: 0.0 to 600°F Option DSA 31: 0 to 800°F or 0 to 425°C N/A N/A 0.1°F or °C 0.1°F : 0.0 to 150°F 1°F: above 150°F 1°F or °C 0.
Ordering Guide for Meters and Rigid Stem Sensors Digi-Stem® Meters and Rigid Stem Sensors DIGI-STEM® METERS FOR RIGID & REMOTE SENSORS Insert Model Number Code in white boxes at bottom of table to construct Part Number for product desired. Code DST200 DST300 DST310 DSX300 DSX310 Meter Description Meter, 0.0/199.9°F (-20.0/130.0°C), Battery Powered Display Meter, 0.0/300°F, (Not available in C), Battery Powered Display Meter, 200/800°F (100/425°C), Battery Powered Display Meter, 0.0/300°F (-18.0/150.
Digi-Stem® Remote Stem Sensors Ordering Guide for Remote Stem Sensors DIGI-STEM REMOTE STEM SENSORS Insert Model Number Code in white boxes below to construct Part Number for product desired. Code DSTP DSXP Remote Probe Start here when ordering a Remote Stem Sensor separately or as part of a complete unit with a Meter.
Digi-Stem® Options and Accessories Options and Accessories ADDITIONAL OPTIONS FOR DIGI-STEM THERMOMETERS Order as separate line items from Meter Model Numbers Code Range Expansion Options D1284-2 Range Ext, DST310/DSA31, -30/125°C D1284-3 Range Ext, DST200F, -50/200°F D1284-4 Range Ext, DST200F, -50/1450°F * DSA20 Range Ext. DST200C, 0/199.9°C DSA21 Range Ext. DST200C, -20/150°C DSA30 Range Ext. DST300F, 0.0/600°F * DSA31 Range Ext.
NEW! Actual Size • Exclusive PatentPending Wahl® Continuous SelfChecking Technology • Trustworthy Alternative to Mercury-in-Glass • Designed in compliance with FDA’s Proposed Rule Change for 21 CFR Part 113 ® DST600 Digi-Stem® Digital RTD Reference Thermometer for Retorts & Temperature Critical Applications www.industrialproductdemos.com/wahl_dst600 www.palmerwahl.
Wahl® DST600 Key Features and Benefits The Wahl® DST600 is the new standard against which all other temperature indicating devices are compared.
Wahl® DST600 Probe Selection and Measurement Optional Quick Disconnect for Calibration Convenience Default display shown for disconnected cable Optional Quick Disconnect for both probe and meter connections offers convenient calibration for the user. This industry leading, and time saving capability allows the probe and meter to be removed and taken to the calibration lab and calibrated as a system - without removing the permanently installed cable.
Wahl® DST600 Calibration and Programming Software and Accessories Probe ID and Probe Rø Probe ID - The unique Probe ID feature verifies that the authorized probe is connected to the meter. If an unauthorized probe is connected, the meter will display “Prb”, indicating the need to perform the probe authorization and probe calibration functions. Probe ID is available on Adjustable Angle, Rigid, and Remote probes up to 30-meter lengths.
Meter Specifications and Accessories Wahl® DST600 SPECIFICATIONS Meter Range -50° to 500°F (-45.5° to 260°C) Scale System Accuracy Display User Selectable for °F or °C Greater of ± 0.3°F/.2°C or ± 0.1% of reading, over 1-year period (@ Tamb = 23°C) ± 5°C 1.0” 4-digit LCD display with icons for °F, °C and Low Battery, Readable up to 30 ft. Display Resolution 0.1°F/C Sample/Display Rate 1/second standard, adjustable in .25 second intervals from .
WAHL DST600 METER & PROBE ORDERING GUIDE Code Step 1 - order DST600 RTD Meter DST600 Digi-Stem RTD Meter, LCD, Battery Operated, (NIST Traceable Certificate of Calibration and Battery included) -50° to 500°F (-45.5° to 260°C) Code Step 2 - order DST600 RTD Probe by inserting correct codes for desired probe in white boxes at bottom of form.
THE WAHL DST600 SOLUTION! The Wahl DST600 Solution to the FDA Proposed Rule Change to 21CFR Part 113 Investing in the NEW DST600 Digital RTD Thermometer puts you on the road towards meeting and exceeding the Proposed Rule changes from the FDA. • The Wahl DST600 has the most advanced patent pending RTD technology available of any thermometer on the market today that guarantees accuracy and reliability during processing.
Wahl® DST600 Solution FDA Proposed Rule 21CFR Part 113 Wahl DST600 Solution Items 1 and 2 are from the Preamble. 1 Page 11991 ...evidence that if the device does not maintain its accuracy, it would become immediately known by the operator... Patent Pending Self-Checking circuitry checks meter accuracy every 8 seconds. Display indicates ""err"" if accuracy check fails. Resets automatically when corrected.
Wahl® DST600 Solution FDA Proposed Rule 21CFR Part 113 Wahl DST600 Solution Items 1 and 2 are from the Preamble. 4b Ambient Temperature variations Ambient Temperature coefficient of no greater than .003°/°. This equates to no more than .03° change in reading for a 10° ambient temperature change. 4c Vibration Tested in accordance with MIL STD 202G Method 201A extended to 60Hz vibration: 10 to 60 Hz.
Wahl® DST600 Solution FDA Proposed Rule 21CFR Part 113 Wahl DST600 Solution Items 1 and 2 are from the Preamble. 7 113.40 (iv) A temperature-indicating device shall be eas- DST600 has 0.1°F/C resolution. ily readable to 1°F (0.5°C). Additional info: 8 NIST Certification Test Reports Wahl includes a 3 point NIST traceable Certificate of Calibration. A calibration tag is placed on the face of the case indicating date calibrated, date due, calibrated by, and test report #.
NEW! ® Actual Size • Accurate • Reliable • Low Ambient Temperature Coefficient • Rigid & Remote Sensors for Industrial Process • Temperature Indicators & Transmitter System DST500 DSX500 Digi-Stem® Digital High Accuracy RTD Thermometer Systems for Process Monitoring & Control Another Innovation from Palmer Wahl! www.palmerwahl.
Wahl® DST500 DSX500 Key Features and Benefits Wahl’s NEW! DST500 and DSX500 Series Digital RTD Thermometer Systems are wide range, high accuracy thermometers designed for many applications where accurate and reliable temperature monitoring and recording are important.
Wahl® DST500 DSX500 Probe Selection and Measurement Optional Quick Disconnect for Calibration Convenience Default display shown for disconnected cable Optional Quick Disconnect for both probe and meter connections offers convenient calibration for the user. This industry leading, and time saving capability allows the probe and meter to be removed and taken to the calibration lab and calibrated as a system - without removing the permanently installed cable.
Wahl® DST500 DSX500 Calibration and Programming Software and Accessories Probe Rø Probe Rø - The Wahl DST500 & DSX500 include an exclusive compensation feature utilizing a programmable Rø calibration coefficient for increased accuracy. This allows the meter and probe to be “matched” to each other, and guarantees an accurate system.
Wahl® DST500 DSX500 Meter Specifications and Accessories DST500 & DSX500 RTD METER SPECIFICATIONS Model DST500 DSX500 Meter with Local Display Meter with Local Display and 4-20mA Transmitter Meter Range -328° to 1472°F (-200° to 800°C) Scale User Selectable for °F or °C Meter Accuracy ± 0.1°F/C, over 1-year period (@ Tamb = 23°C ± 5°C) System Accuracy Greater of ± 0.3°F / 0.2°C or ± 0.1% of reading, over 1-year period (@ Tamb = 23°C) 1.
WAHL DST500 & DSX500 METER & PROBE ORDERING GUIDE Code Step 1 - order DST500 or DSX500 RTD Meter DST500 Digi-Stem RTD Meter, LCD, Battery Operated, (NIST Certificate and Battery included) -328° to 1472°F (-200° to 800°C) DSX500 Digi-Stem RTD Meter, LCD, 4-20mA Transmitter, (NIST Certificate included) -328° to 1472°F (-200° to 800°C) Code Step 2 - order DST500 or DSX500 RTD Probe by inserting correct codes for desired probe in white boxes at bottom of form.
