Specifications
10/08
WAHL DST500 & DSX500 METER & PROBE ORDERING GUIDE
Code Step 1 - order DST500 or DSX500 RTD Meter
DST500 Digi-Stem RTD Meter, LCD, Battery Operated, (NIST Certificate and Battery included) -328° to 1472°F (-200° to 800°C)
DSX500 Digi-Stem RTD Meter, LCD, 4-20mA Transmitter, (NIST Certificate included) -328° to 1472°F (-200° to 800°C)
C
ode
S
tep 2 - order DST500 or DSX500 RTD Probe by inserting correct codes for desired probe in white boxes at bottom of form.
DST5 DST/DSX500 RTD Probe
Code Process Connections
01 1/2" NPT Fitting
02 3/4" NPT Fitting
0
3
1
-1/2" Diameter - 3-A Sanitary Standard 74-03; Stem Type Code “2”, Welded only; Material 2, 316L SS - 450°F only
04 2" Diameter - 3-A Sanitary Standard 74-03; Stem Type Code “2”, Welded only; Material 2, 316L SS - 450°F only
05 2-1/2" Diameter - 3-A Sanitary Standard 74-03; Stem Type Code “2”, Welded only; Material 2, 316L SS - 450°F only
06 3" Diameter - 3-A Sanitary Standard 74-03; Stem Type Code “2”, Welded only; Material 2, 316L SS - 450°F only
0
7
1
-1/4" x 18 NEF2 Swivel Nut Fitting
Code Mounting Style
A Adjustable Angle (Pictured on cover, not available on Remote Stems)
B Rigid (Pictured on pg 2, Bottom Connected)
C Remote (Pictured on pg 3, Mounting Bracket not included - see Options pg 5)
Code Stem Type
0 Not Applicable
1 Brazed
2 Welded
3 Spring Loaded, Process Connection Codes “01” & “02” only. Stem Tip Diameter Code “1” only. Allows approx 1.0" Spring Travel.
Code Stem Material/Construction
1 304 SS, Temperature Rating, 450°F (232°C)
2 316L SS, Temperature Rating, 450°F (232°C)
3 304 SS, High Temperature Rating, 1472°F (800°C)
4 316L SS, High Temperature Rating, 1472°F (800°C)
Code Stem Diameter
1 1/4" Diameter
2 3/8" Diameter
3
5/8" Diameter Stem, 7/16" Tapered Bulb (Process Connection “07”, Stem Type “0”, Stem Lengths: 3.5", 6", 8", 9", 12"only)
Code Stem Lengths (Specify exact length desired)
01X-72X
1" to 72" Length in inches - 01X = 1 inch, 02X = 2 inch, 03X = 3 inch, etc.
For fractional lengths substitute X with: A = 1/4", B = 1/2", C = 3/4", Example: 04A = 4-1/4".
Stop her
e if or
dering Adjustable Angle or Rigid Probe.
If or
dering a Remote Pr
obe continue with options below.
Code Meter Connection - where cable attaches to Digi-Stem Meter
1 Fixed(Cable attached to meter via 1/2" NPT fitting, must disconnect fr
om PCB to separate fr
om meter)
2 Quick Disconnect (Cable attached via IP68 rated TURCK plug & r
eceptacle)
Code Cable T
ype
1 PVC, Temperature Rating 105°C
Code Cable Length
002 2 meters (6.5 feet)
Insert Model Number Code
in white boxes below to
construct Part Number
for specific probe desired
004 4 meters (13.1 feet)
006 6 meters (19.7 feet)
008 8 meters (26.3 feet)
010 10 meters (32.8 feet)
011-200 011 = 11 meters, etc. (Specify exact length desired up to 200 meters)
Code Probe Connection - point where cable attaches to probe fitting
Adjustable Angle and Rigid Pr
obe
Or
dering Infor
mation
Remote Pr
obe
Or
dering Infor
mation
1 Fixed (Cable permanently attached to probes process fitting)
2 Quick Disconnect (Cable attached via IP68 rated TURCK plug/receptacle)
DST5
Step 3 - or
der Softwar
e and Meter Accessories.
Call Customer Ser
vice, or see Price List/Or
der For
m for help.
6
PW1202
(800) 421-2853 • F
AX (828) 658-0728 • www
.palmer
wahl.com