Operating instructions
9
PROFESSIONAL SHAVER
• Replace cutter bar assembly if damaged. Damage to the foil will
result from using a broken or bent cutter bar assembly. WAHL
MODEL NO. 7043 REPLACEMENT FOIL/CUTTER BAR
ASSEMBLY
• Replace foil if creased, worn or broken. Using a damaged or
broken foil can result in facial injury. WAHL MODEL NO. 7043-100
REPLACEMENT SUPER CLOSE GOLD FOIL
• Always replace the Foil Guard to protect the delicate dual foil
heads when the shaver is not in use.
• For best performance, charge shaver until full charge is achieved
before rst use. When the shaver is fully charged, the Recharging
Indicator Light will not be illuminated.
OPERATING INSTRUCTIONS
QUICK TIPS & HANDY REMINDERS
• The foil is designed for super close cutting to hair that is as close
as 0.1mm, the foil needs to glide over the skin. Do not press
hard against the skin but allow the shaver to work for you.
Pressing against the skin too hard can cause damage to the foil.
• It is important to use the shaver with a foil and cutter bar assembly
that is clean and free of hair and other debris that might aect
performance.
• The foil and cutter bar assembly are consumable parts.
Replacement time may vary depending on usage. The foil is
micro-thin with precise, raised inner cutting edges around the
holes. These raised cutting edges will wear with use which will
be indicated if your shaver slows down and the foil seems to get
warm.
• To ensure continued shaving satisfaction, you should replace the
foils often and cutter bar assembly periodically. (g. A)
OK
A