Instruction Booklet
8
CORD/CORDLESS CLIPPER
into the slot in the housing and press down until it clicks into place.
OILING CLIPPER BLADES
The blades of your new clipper should be oiled after every haircut.
Simply place a few drops of Wahl Clipper Oil on the blades at points
A and B. Switch the clipper on briey (approx 10 seconds) to ensure
the oil lm is evenly distributed. Use only the Wahl Clipper Oil in-
cluded in the pack. Due to the high speed of your Wahl Clipper, the
correct type of oil must be used. Do not use hair oil, grease or any
oil mixed with kerosene or any solvent, as the solvent will evaporate
and leave the thick oil, slowing down the blades. Wahl Clipper Oil
is a very thin, natural oil which will not evaporate and will not slow
down the blades.
IMPORTANT: Do not over Oil.