Instruction Booklet
10
Rechargeable Trimmer
3. Remove the switch assembly from the front of the trimmer by inserting a
small at blade screwdriver into the silver surround, and then peel back the
rubber from the case of the trimmer, and remove.
4. Insert the screwdriver into the slots in the plastic case to split it in two. The
battery and motor unit can then be removed from the case.
5. Cut or break the wire stamps on both ends of the battery and remove the
battery
6. Apply tape to both ends of the battery before recycling/disposing.
BATTERY REPLACEMENT, REMOVAL AND DISPOSAL
(for Lithium battery models only)
Lithium-Ion Battery Replacement
For battery replacement the entire, intact clipper or trimmer should
be sent to: Wahl (UK) Ltd Customer Services (the address can
be found on the reverse of this booklet) or taken to a suitably
qualied professional. The battery should only be replaced by
the original manufacturers spare, for safety reasons a substitute
should not be used.
Do not attempt to remove the battery. Lithium-Ion batteries can
explode, catch re, and/or cause burns if disassembled, damaged
or exposed to water or high temperatures.
Lithium Battery Disposal
Do not dispose of this product or the Lithium battery in the normal
household waste.
The product should be returned to Wahl Customer Services where
we oer a take back service or taken to a local collection facility
where they will be dealt with safely and sent for the appropriate
recycling.
TIPS FOR SUCCESSFUL STYLING
The rst time you cut hair, cut only a small amount until you become accustomed
to how long each guide comb leaves the hair. Always start by placing the
largest guide comb on the clipper, then use shorter combs (or settings – if using