Instruction Booklet

Rechargeable Trimmer

NOTE: It is okay to leave the device in its stand for storage if the stand

allows for the charger to be disconnected from the stand or product.

• Perform regular maintenance on the device including keeping the blades

oiled, clean, and free of debris to prevent taxing the battery.

• When not in use, store the partially charged device in a cool and

dry place away from heat sources and direct sunlight ( 25°C Ambient or

less recommended)

WARNING: ONLY USE THE TRANSFORMER SUPPLIED WITH THE

TRIMMER. (For Lithium models please use S004MB0400090 charger. For

non Lithium models, please use SPE024012B charger).

Recharging Your NiMH Trimmer (Models 9854-800 and 9860-806)

1. This Trimmer is conveniently designed for household use. It should be

allowed to charge overnight before rst use.

2. Remove the trimmer, recharging transformer and accessories from the

packaging.

3. Connect the transformer to the trimmer. BE SURE THE TRIMMER IS IN

THE OFF – 0 POSITION WHEN CHARGING.

4. Plug the recharging transformer into any convenient electrical outlet at the

correct voltage.

5. When the trimmer is low in power, it should be connected to the

transformer and plugged into an outlet to assure maximum power is

available when it is next used. This transformer is designed to continuously

charge the battery without over charging.

6. Ni-MH battery life may be extended with the following procedure: Once

every month, let the trimmer run until the motor stops. Move the switch to

the OFF – 0 position and recharge fully overnight.