Instruction Booklet

Rechargeable Trimmer

TROUBLESHOOTING FOR BOTH MODELS

If your trimmer does not seem to be charging, check the following before

returning it for repair:

1. Check outlet to make sure it is working by plugging in another appliance.

2. Be sure the trimmer is properly connected to the recharging transformer,

all the connections are secure and the switch on the trimmer is turned

OFF.

3. If your electricity is connected to a master power switch, we suggest the

trimmer be disconnected from the charger anytime the master switch is off.

Leaving the unit plugged into a dead outlet or an unplugged charger will

drain the battery.

4. If the trimmer does not run and it is completely charged, turn the unit ON

and pinch or push the blades manually. Oil may have dried out between

the blades, so they may be temporarily stuck together.

BATTERY REPLACEMENT, REMOVAL AND DISPOSAL

(for MiMH models only)

Battery Replacement

For battery replacement the entire, intact clipper/ trimmer should be sent to: Wahl

(UK) Ltd Customer Services (the address can be found on the reverse of this

booklet) or taken to a suitably qualied professional. The battery should only be

replaced by the original manufacturers spare.

Battery Removal and Disposal

At the end of its life, when it will no longer take a full charge, the battery in your

clipper/ trimmer must be removed and recycled/disposed of correctly. Batteries

should be disposed of at an ofcial collection point separately from the clipper/

trimmer. If you are having trouble removing the battery you can also return

the product to Wahl (UK) Ltd Customer Services who will dispose of it in an

environmentally safe way.

To remove the battery, follow these steps:

1. Unplug the transformer from the outlet, disconnect from trimmer and allow

the battery to completely run down before disassembly.

2. Remove the blade by pushing on the teeth away from the trimmer head.