Instruction Booklet
7
Battery Trimmer
USING THE JAW LINE BLENDER ATTACHMENT
1.Comb your moustache.
2.Cut the outline of your moustache. Holding the trimmer in a vertical
position, with the nameplate side facing you, dene the line of your
moustache.
3.Blending. Holding the trimmer with the nameplate facing you, rst
take the Jaw Line blender and, starting with the middle of your
moustache, lightly trim at direct angles away from the middle. For a
shorter length, use the medium or short cut attachment.
4.Tapering. Hold the trimmer with the nameplate facing away from you.
Take the medium or short cut attachment and, again starting with
the middle of your moustache, follow the lip line and taper out the
moustache until a gentle shape is created on the bottom portion of
your moustache.
5. Dening. As a nishing step, hold the trimmer with the nameplate
facing you. Using only the bare blades, make a denitive line at the
bottom of your moustache.
CLEANING AND MAINTENANCE
OILING BLADES
For best results, put one or two drops of Wahl Clipper Oil on the blades.
Oil the blades before and after every use.
When oiling the trimmer, turn the trimmer ON, hold the unit facing down
and squeeze one or two drops of oil onto the blades. Wipe off excess oil
with a cloth.
NOTE: Do not over oil! Excessive oiling or application of liquids will
cause damage if allowed to seep back into the motor.
WARNING: NEVER IMMERSE TRIMMER IN WATER OR ANY
OTHER LIQUIDS