Instruction Booklet

11
CORDLESS CLIPPER INSTRUCTIONS
o󰀨 automatically.
•In case of insu󰀩cient maintenance of the blade set, the operating
time can be reduced considerably.
MAINS OPERATION
1. Connect the appliance plug (K) on the plug-in transformer to the
appliance socket (F) (Fig. 2a).
2. Connect the plug-in transformer to the mains socket (Fig. 2b).
3. Switch on the appliance using the on/o󰀨 switch and switch o󰀨
after use (Fig. 3a/b).
AUTOMATIC SENSOR SYSTEM
To give you advance notice of an urgent need for maintenance care,
your hair cutting appliance has been equipped with an automatic
sensor system.
The sensor system automatically recognises when the blade set
needs oiling or cleaning. After the appliance is switched o󰀨, an
acoustic signal will sound and the battery power indicator will ash
for 2 minutes. The acoustic signal and the ashing of the battery
power indicator can be cancelled (turned o󰀨) by briey switching the
appliance on and o󰀨.
Before using the appliance again, it is strongly recommended to
clean the appliance and oil the blade set.
Failure to observe these instructions may result in damage to
andearly failure of the appliance, which will void all guarantee
claims