Instruction Booklet
15
CORDLESS CLIPPER INSTRUCTIONS
SETTING THE CUTTING LENGTH
The cutting length can be adjusted to between 0.7 mm and 3mm (5
possible positions) using the cutting-length adjustment integrated
into the blade set (Fig. 9).
CUTTING WITH THE ATTACHMENT COMB
The appliance can also be operated with attachment combs. In
order to achieve the indicated cutting length, the cutting length
adjustment lever should be set to position 1 (Fig. 9).
Attachment combs are optional accessories and can vary from
model to model.
ATTACHING/REMOVING THE ATTACHMENT COMB
1. Slide the attachment comb on to the blade set in the direction of
the arrow until it reaches the limit stop (Fig. 10a).
2. The attachment comb can be removed by pushing it in the
direction of the arrow (Fig. 10b).
•When the battery has fully run down, the appliance switches itself
o automatically.
•
In case of insucient maintenance of the blade set, the
operating time can be reduced considerably.
MAINS OPERATION
1. Connect the appliance plug (Q) on the plug-in transformer to the
appliance socket (F) (Fig. 6a).
2. Connect the plug-in transformer to the mains socket (Fig. 6b).
3. Switch on the appliance using the on/o switch and switch o
after use (Fig. 7a/b).