Instruction Booklet

CORDLESS CLIPPER INSTRUCTIONS

CARE AND CLEANING

Danger! Electric shock due to penetration of liquid.

► Switch the appliance off and disconnect from the power supply,

before you start with cleaning and care.

► Do not immerse the appliance in water!

► Do not allow any liquid to get inside the appliance.

► Only reconnect the appliance to the power supply if it is

completely dry.

Handle with care! Danger from aggressive chemicals.

Aggressive chemicals could damage the appliance and

accessories.

► Never use solvents or scouring agents.

► Only use cleaning agents and blade set oil recommended by the

manufacturer.

Hygienic spray and blade oil are available from your wholesaler or

direct from our customer service.

Remove the attachment comb (Fig. 10b) after every use and lift the

blade set out of the housing (Fig. 11a).

Use the cleaning brush to remove any cut hairs from the

housing opening and from the blade set (Fig. 12). The cleaning

lever can also be pressed. This allows the cut hairs that

accumulate between the bottom blade and the top blade to be

easily removed using the cleaning brush (EASY CLEANING).

Only wipe the appliance with a soft, slightly damp cloth.

The blade set can be cleaned by using the hygienic spray.

Oil the blade set with the blade set oil (Fig. 13).

For a good and long-lasting cutting performance, it is important to

oil the blade set frequently. If the cutting performance deteriorates

after long use despite regular cleaning and oiling, the blade set

should be replaced.