Instruction Booklet

19
CORDLESS CLIPPER INSTRUCTIONS
Battery power indicator light does not light up.
Cause: Appliance has not been correctly placed on the charging
stand.
► Ensure that the hand-held appliance has been correctly placed on
the charging stand.
Cause: Defective power supply.
► Ensure that the power supply unit is plugged into the mains
socket.
► Check the mains cable for possible damage.
► Check the power supply.
Entire battery power indicator is ashing
► Check whether the blade set is blocked and the blade is able
to move. Switch the appliance on and off. If the entire display is
flashing, please contact your specialist retailer or a WAHL service
centre.
WIRING
WARNING: If the transformer is damaged it must be
replaced.
This product must only be used with the transformer supplied.
Should a replacement be required please contact Wahl
Customer Services.
LITHIUM BATTERY REPLACEMENT,
REMOVAL AND DISPOSAL
Lithium-Ion Battery Replacement
For battery replacement the entire, intact clipper or trimmer
should be sent to: Wahl (UK) Ltd Customer Services (the
address can be found on the reverse of this booklet) or taken
to a suitably qualied professional. The battery should only
be replaced by the original manufacturers spare, for safety
reasons a substitute should not be used.
Do not attempt to remove the battery.
Lithium-Ion batteries can explode, catch re, and/or cause
burns if disassembled, damaged or exposed to water or high
temperatures.