Instruction Booklet

9
CONICAL WAND
CLEANING AND MAINTENANCE
• Always disconnect the appliance from the wall socket and allow it
to cool down completely before any cleaning operation.
• Do not use abrasive cleaning agents or scrub pads.
• Do not use alcohol or solvents.
• Wipe the main body and the ceramic plates with a slightly damp
and soft cloth. Dry with a soft and dry cloth.
• Never immerse the appliance in water or any other liquid.
TROUBLESHOOTING
Problem
Possible Cause Solution / Hint
The appliance
does not switch
on.
The appliance is
not switched on.
Press the on/o󰀨 button until the
appliance beeps and the LED
screen lights up.
The plug is not
tted correctly
into wall socket.
Fit the plug correctly into wall
socket.
The wall socket
is damaged.
Connect the appliance to a wall
socket that works properly.
The supply
cord may be
damaged.
The supply cord must be replaced by
a suitably qualied technician in order
to avoid any hazards.
Smoke comes
out of the hair or
from the appliance
during use.
You have
put products
on your hair
(for example,
mousse, spray
or gel).
This is normal if you use products
to style. Never put any product in
your hair that is not suitable for use
with high temperature appliances.
Do not use gel or wax. Use only
styling products specically
designed for this purpose.
The results are not
as expected.
You have put too
much hair on the
barrel.
Reduce the size of the section of
the hair you are curling to create
the desired result.